Discussions
Activity
Sign In
How it works
Reaz Baksh
Activity
Discussions
19
Comments
123
Airtime Development Status // Summer 2016
Hello @robbt, I had given up on Airtime about 2 years ago but seeing your post I decided to try yours. After install the localhost does not show. Under the apache2 sites there is no airtime site. I think you should fork and create a new project. j…
Comment by
Reaz Baksh
November 2016
permalink
Running Airtime in a special environment.
@Roger Wilco "You're probably better off holding all of your horses for the next major release. The codebase is currently undergoing massive changes behind the scenes." So is there a major upgrade comming?
Comment by
Reaz Baksh
February 2016
permalink
Airtime Update - September
Given all of the above, when will the next release happen? Date, time and maybe year? Not into the git thing.
Comment by
Reaz Baksh
October 2014
permalink
Airtime Hosted, Really Cheap + Trial on request
Hello NathanWould you consider sharing the complete code or create a fork of Airtime? It seems that you have accomplished quite a bit in a short time.
Comment by
Reaz Baksh
September 2014
permalink
Liquidsoap
Well, I think to messed up my system. Liquidsoap will not start. I added the shine plugin for liquidsoap and after airtime-liquidsoap restart I get the following: sudo invoke-rc.d airtime-liquidsoap restartRestarting Liquidsoap Playout Engine: (…
Comment by
Reaz Baksh
February 2014
permalink
Liquidsoap
@Voisses, you are correct that this is an experiment. Everything starts as an experiment then transitions to reality. Thanks for the links I do intend to go through them as my Liquid Soap knowledge is very limited. @John, if LiquidSoap manipulates…
Comment by
Reaz Baksh
February 2014
permalink
Liquidsoap
Well, thanks for all the response but I think the original question was totally misinterpreted. I'll explain again: -if I had all my audio files at 64k mp3 and my output to icecast was 64k mp3, would there be any modification to the airtime str…
Comment by
Reaz Baksh
February 2014
permalink
Liquidsoap
How about enabling the SHINE option. Going directly to Icecast would disable the crossfade feature along with others.
Comment by
Reaz Baksh
February 2014
permalink
Airtime on my 512mb Raspberry Pi
Well, I looked and looked but all I found was links to sites that showed how to do it but nothing from an Airtime setup.
Comment by
Reaz Baksh
February 2014
permalink
[Airtime 2.5.1] Can't upload audio files
Having the same problem to the /srv/airtime/stor/ destination. Started using the watch folders but that caused a different problem.
Comment by
Reaz Baksh
February 2014
permalink
Airtime on my 512mb Raspberry Pi
To reduce the CPU load on the Pi, is it possible to migrate from Apache2 to nginx? If not is there any way I can strip down Apache to reduce the CPU load like disabling modules or something else? Also how can I disable mp3gain and silan?
Comment by
Reaz Baksh
February 2014
permalink
Airtime on my 512mb Raspberry Pi
Unfortunately my image is about 1.2G in size due to me using a 32G SD card. The build instruction is as follows: Set the pi GPU to 16. First sources.list has the following: deb http://mirrordirector.raspbian.org/raspbian/ testing main contrib non-…
Comment by
Reaz Baksh
February 2014
permalink
Airtime on my 512mb Raspberry Pi
I have a version sort of working. I had some Segmentation Faults with my previous setup and had to rebuild the entire thing. I'm now trying to create an image of the SD card but I'm now running into issues where it will error due to CRC …
Comment by
Reaz Baksh
February 2014
permalink
Airtime on my 512mb Raspberry Pi
I am able to get Airtime running on the pi. The only issue I have is playing mp3 files. It keeps dropping even though Airtime says it is playing. I'm now trying flac files instead of mp3 to see if there are any differences. The other issue …
Comment by
Reaz Baksh
February 2014
permalink
2.5.1 upgrade fails
Thanks for this Albert. I'll go through the link.
Comment by
Reaz Baksh
December 2013
permalink
install fails; manual, rpi/arm deb wheezy 2.5.1
Hi Lee Would you mind giving us a step by step on how you got this to work? A number of us have tried this without any luck?
Comment by
Reaz Baksh
December 2013
permalink
OK - Thanks for everything everybody. Adieu!
Hi, where are you going? Don't leave! The more input Airtime gets the better it will be. I think. I've been using it for about a year and honestly it has improved quite a bit.
Comment by
Reaz Baksh
November 2013
permalink
Airtime on raspberry pi
HelloAllan, were you able to get this working? Within the documents posted by Daniel it indicated that the files should be converted to flac. Were you able to get it working without any issues using mp3's? I'm looking to try this.
Comment by
Reaz Baksh
November 2013
permalink
[SOLVED - I LEFT]
I get it now. So it was a Linux update that did this not the Airtime upgrade. Good to know.
Comment by
Reaz Baksh
November 2013
permalink
[SOLVED - I LEFT]
Just a quick question, is there a problem with Airtime using a RAID array for storage when doing an upgrade? I have a RAID 5 system I'm trying to migrate to from the /srv/airtime location. If I did the migration would there be a problem after …
Comment by
Reaz Baksh
November 2013
permalink
Airtime 2.5.0 Released!
For some reason my Listener Stats rectangular box that showed the amount of listeners is now totally blank. The remaining part of the page looks normal except for the Stats part. Is there something I can do to get it back. I rebooted, stopped and…
Comment by
Reaz Baksh
November 2013
permalink
Airtime on raspberry pi
I read somewhere that with the 512M RAM this will not support Liquidsoap. What about anA20-Cubieboard? It has 1G DDR3 RAM. http://docs.cubieboard.org/products/start Would this work with Airtime?
Comment by
Reaz Baksh
October 2013
permalink
Airtime 2.5.0 Beta 1 Released!
HelloI haven't tried this version yet but does it fix the multiple metadata that is sent? Presently I get about 3 to 4 ID per track on both Shoutcast and Icecast.
Comment by
Reaz Baksh
October 2013
permalink
Airtime Mobile
Hi DanielMy main interest is to administer Airtime on a mobile device. As you mentioned some pages do have a lot of functionality and is difficult to manipulate. I was looking to see if the mobile version would have a stripped down version where i…
Comment by
Reaz Baksh
October 2013
permalink
I upload on Add Media, not shown on Library!
This also happens to me. What I found most of the time was the rabbitmq-server had stopped. Check to see if it is running. The previous posts lists all the steps. It would be nice if Airtime could check to see if all the processes are running be…
Comment by
Reaz Baksh
October 2013
permalink
Admin account not working
Now this is weird. I tried the admin account and it now works. Did nothing except the "select * from cc_subjs where login='admin';" to check the existence of the admin account. @hoerich did not run yours since the account is b…
Comment by
Reaz Baksh
September 2013
permalink
Moving the Import Folder
Hi @VoissesThe reason I did this was two fold:I wanted to create a sort of backup in case the mounted external RAID fails. If it did, the original /srv/airtime will then be the source. My plan is to have the original /srv/airtime also have an upda…
Comment by
Reaz Baksh
September 2013
permalink
Moving the Import Folder
I really need to check this forum more regularly. Thanks for the suggestions. I decided on mounting the external storage on /srv. The only problem I encounter is importing tracks. I can preview directly for the external storage and Airtime seems…
Comment by
Reaz Baksh
September 2013
permalink
An 'Improved' AT Widget jquery.showinfo.js is here
Hi JohnI tried this and there was no change. I modified the line: html +=''; But did not see a change.
Comment by
Reaz Baksh
September 2013
permalink
An 'Improved' AT Widget jquery.showinfo.js is here
This is good. I'll try it out. How can the background colour be changed? One of the issues with the weekly schedule is that on Sunday it will show the past week and nothing for the upcoming week. It would be nice if the current day is in th…
Comment by
Reaz Baksh
September 2013
permalink
More Comments
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Sign In
Apply for Membership
Follow Reaz Baksh
About
Username
Reaz Baksh
Joined
March 2013
Visits
0
Last Active
November 2016
Roles
Member
Posts
142
Friends
My Badges
Total Points: 70
Top Posters
Albert FR
1978
Martin Konecny
1860
Andrey Podshivalov
1526
Voisses Tech
1423
John Chewter
899
Daniel James
844
Roger Wilco
784
hoerich
627
Paul Baranowski
389
Cliff Wang
339