Martin Konecny

Airtime 2.4 beta2!
So the problem is just with the display of what's currently playing in the Web UI, not actually what's being broadcast correct? On Thu, Jun 6, 2013 at 7:43 PM, Roger Wilco < airtime-dev@lists.sourcefabric.org> wrote: > from /va…

Comment by Martin Konecny June 2013 permalink
Every media file appears corrupt on upload (Airtime 2.3.1)
Double check if the file actually exists at that location. I believe you are missing username in the path. On 2013-06-06 6:05 PM, "Pierre Coovert" < airtime-support@lists.sourcefabric.org> wrote: > Thanks, but I get the same resp…

Comment by Martin Konecny June 2013 permalink
Every media file appears corrupt on upload (Airtime 2.3.1)
On Thu, Jun 6, 2013 at 5:52 PM, Pierre Coovert < airtime-support@lists.sourcefabric.org> wrote: > thanks for your response. I am relatively new to Linux and am trying to > make the change. > It says the source is fallible, because y…

Comment by Martin Konecny June 2013 permalink
Every media file appears corrupt on upload (Airtime 2.3.1)
try playing one of the files from the command line like so liquidsoap 'output.dummy(single("/path/to/file"))' Sounds like Liquidsoap is complaining about a missing VST audio plugin.

Comment by Martin Konecny June 2013 permalink
Every media file appears corrupt on upload (Airtime 2.3.1)
Take a look into /var/log/airtime/zendphp.log - is there anything obvious there?

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta2!
@Roger Have you been able to shed any light on this? On Wed, Jun 5, 2013 at 5:52 PM, Roger Wilco < airtime-dev@lists.sourcefabric.org> wrote: > Vorbis and MP3 do work though, so I know the plumbing is at least > partially cobbled toge…

Comment by Martin Konecny June 2013 permalink
Every media file appears corrupt on upload (Airtime 2.3.1)
What's your OS? What file types are you uploading? On Thu, Jun 6, 2013 at 11:43 AM, Pierre Coovert < airtime-support@lists.sourcefabric.org> wrote: > Has anyone got an answer to this problem. I have searched the internet and > th…

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta2!
Did you install fdk using these steps: https://wiki.sourcefabric.org/pages/viewpage.action?pageId=13632310 ? On Wed, Jun 5, 2013 at 5:15 PM, Roger Wilco < airtime-dev@lists.sourcefabric.org> wrote: > Stuck again — installed liquidsoap1…

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta2!
@Marcin+Tym, Your logs look ok. Try visiting http://localhost:80/api/status/format/json/api_key/%%api_key%% and replace "%%api_key" with key found in /etc/airtime/airtime.conf, and verify webserver is actually responding correctly (webser…

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta2!
Ran into this wee beastie spinning up a new beta2 instance. Maybe hostnames shouldn't start with a number? Not creating home directory `/var/lib/rabbitmq'. [warn] Starting message broker: rabbitmq-server[....] FAILED - check /var/log/rabb…

Comment by Martin Konecny June 2013 permalink
"Offline" between songs
I believe this has been fixed in the upcoming Airtime 2.4. If you have a chance, check out the beta. On Tue, Jun 4, 2013 at 7:26 PM, Rick Munday < airtime-support@lists.sourcefabric.org> wrote: > Just coming back up on-air and during tes…

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta2!
@Roger @Reaz This is interesting, I have no idea why installing aacgain would affect crossfading. If aacgain is missing, then the replaygain value of a track becomes simply 0dB. Why crossfade would start to work is the value becomes +8dB (for exampl…

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta2!
Thanks Reaz. If it starts happening again, please post some logs asap. We will look into waveforms with smart blocks. On Jun 3, 2013 7:36 PM, "Reaz Baksh" wrote: > Testing Beta2 for a while and at the beginning the issue with cross-fa…

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta2!
silan version 0.3.1 I configured all my shows with the content, after that everything looks like it's working, at least it is displayed inside Airtime. But when I tried the stream I didn't hear anything. So I restarted airtime-playout and …

Comment by Martin Konecny June 2013 permalink
Additional Icecast Mounts?
Make sure Liquidsoap is using an admin username + password. Otherwise the mount has to be pre-defined (not dynamic)

Comment by Martin Konecny June 2013 permalink
Liquid soap error takes down broadcast regularly on new install of Airtime.
Sorry guys, noob question... Could you please point me towards upgrade instructions for liquidsoap? thanks in advance... Please find the appropriate Debian package for your OS here: http://apt.sourcefabric.org/misc/liquidsoap_1.1.1/

Comment by Martin Konecny June 2013 permalink
Liquid soap error takes down broadcast regularly on new install of Airtime.
Starting liquid-soap does get it going again, sometimes only for an hour, sometimes only a few minutes. Further info, and request for help please to the devs. Pypo logs are giving me this, is this my fault? I'm not sure what it means or why I&#…

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta1!!!
Hey guys, I'm closing this thread to limit confusion. If you found a bug in beta1, please try installing beta2 and if it still exists, comment in that thread. http://forum.sourcefabric.org/discussion/15527/airtime-2-4-beta2

Comment by Martin Konecny June 2013 permalink
Use PHP-FPM or FastCGI instead of mod_php
Hi Charos, The reason for using mod-php is that in most cases Airtime is very low traffic (it isn't really public facing). However Airtime runs just fine using php-fpm, and you may enable this if you wish to do so. On Jun 2, 2013 4:59 AM, &quo…

Comment by Martin Konecny June 2013 permalink
Impossible to change station time - airtime 2.3.1
Click on your user profile. You will be able to set your user specific timezone there. The timezone you are setting now is a global setting for new users. On Sat, Jun 1, 2013 at 12:53 PM, nasr < airtime-support@lists.sourcefabric.org> wrote:…

Comment by Martin Konecny June 2013 permalink
finished with airtime
Ashworth, Looks like you have the knowledge and ability to get exactly what you want. Kudos to that, and that is what open-source is all-about. Airtime will probably never take full-advantage of every Liquidsoap feature, because then you may as wel…

Comment by Martin Konecny June 2013 permalink
Airtime 2.4 beta2!
Thanks Roman, From the logs, I can see you only restarted airtime-playout once. So once you did 'sudo service airtime-playout restart' everything began to work fine? On a side note, what's the output of 'silan -V' on your sy…

Comment by Martin Konecny May 2013 permalink
Airtime 2.4 beta2!
Everytime I change the content of shows I have to restart airtime-playout, otherwise the tracks wont play and the streams displays the offline message. Please post the files pypo.log and py-interpreter.log in /var/log/airtime/pypo

Comment by Martin Konecny May 2013 permalink
Airtime 2.4 beta2!
@Roger Is this crossfade problem easily reproducible? Do you have logs?

Comment by Martin Konecny May 2013 permalink
I LOVE YOU GUYS!
Thanks Lisa, This issue you are experiencing is a small speedbump for everyone, and we are working very hard with 3rd parties in getting it fixed. On Mon, May 27, 2013 at 2:42 PM, Lisa Forbes < airtime-support@lists.sourcefabric.org> wrote:…

Comment by Martin Konecny May 2013 permalink
[solved] ok embarrassing... can't find airtime installed
Mitch, If you didn't figure it out yet, Airtime runs in a browser so you can access it remotely :). Try going to http://localhost

Comment by Martin Konecny May 2013 permalink
New Liquidsoap Frustration
@Hoerich, Me and Lisa have been working together to find the root cause of Liquidsoap going silent on her (and other's machines). This was an expected side-effect I didn't notify Lisa about. Closing this thread.

Comment by Martin Konecny May 2013 permalink
finished with airtime
Regarding Lisa's bug - she can verify I've been working with her privately to find why her stream goes offline. This is a tricky bug since so far only 3 users have complained about it, and it happens across different OS'es. Bug has b…

Comment by Martin Konecny May 2013 permalink
finished with airtime
Hey Ashworth, I'd have to disagree with your conclusion. By your logic, all computers should be a terminal with a blinking cursor. Sure there is more power when you go down into the deeper levels, but what works better for you does not necessa…

Comment by Martin Konecny May 2013 permalink
Liquidsoap fails with ALSA (Airtime 2.3 and Ubuntu 12.10)
That error trace you see has been fixed in 2.4 but is harmless. Is Liquidsoap working now? On May 23, 2013 8:51 AM, "Chris Weaver" < airtime-support@lists.sourcefabric.org> wrote: > OK I've installed the Liquidsoap package: …

Comment by Martin Konecny May 2013 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Stop following

About

Username: Martin Konecny
Joined: December 2010
Visits: 0
Last Active: August 2015
Roles: Member
Posts: 1,860

Friends

Following 1 person

Followed by 7 people

My Badges

Total Points: 90

Martin Konecny

Howdy, Stranger!

About

Friends

My Badges

Top Posters