Martin Konecny

[SOLVED] Ubuntu 10.04 server problems with liquidsoap on airtime
What is monopd? Airtime has no relation to this. On May 23, 2013 1:50 PM, "Harald Meininger" < airtime-support@lists.sourcefabric.org> wrote: > i've had installed before monopd. pypo takes the monopd conf so liquidsoap > …

Comment by Martin Konecny May 2013 permalink
Airtime 2.4 beta1!!!
first look at calendar gave a weird picture on my teststation running ubuntu 12.04 x86. the already broadcasted shows of the currently running out week are shown up three times per day. (pic 1) Picture 2& 3 show the next two weeks. Every show o…

Comment by Martin Konecny May 2013 permalink
Airtime 2.4 beta1!!!
This fixed? http://www.hydrogenaudio.org/forums/index.php?s=&showtopic=88183&view=findpost&p=783266 The voaac encoder is pretty low quality as that thread mentions. We will bring support for the newest fdk-aac in the future (it is AAC…

Comment by Martin Konecny May 2013 permalink
Airtime 2.4 beta1!!!
Also, I get streaming blank even if the sent metadata is correct and the web interface shows the progress bar. Liquidsoap doesn't get restarted upon the change of the stream settings. Are you saying that metadata from input webstreams does…

Comment by Martin Konecny May 2013 permalink
Airtime 2.4 beta1!!!
HiI installed the Debian package but it may have been uninstalled when I had some issues upgrading. To get it working I uninstalled 2.3.1 and then installed the 2.4 deb package but I assume the 2.4 should have have asked for it. This will be fixe…

Comment by Martin Konecny May 2013 permalink
Liquidsoap fails with ALSA (Airtime 2.3 and Ubuntu 12.10)
The Liquidsoap binary you have is most likely provided by our own repos. You can verify by doing "dpkg -l | grep liq" and check if there is an "sfo" in the output version string. Building the Liquidsoap binary yourself is easy (a…

Comment by Martin Konecny May 2013 permalink
Liquidsoap fails with ALSA (Airtime 2.3 and Ubuntu 12.10)
Hey, What I was trying to say is that if Liquidsoap was compiled with pulseaudio headers, then it most likely expects the pulseaudio library to exist on the system it runs on. So installing the pulseaudio packages is just a suggestion, but the best …

Comment by Martin Konecny May 2013 permalink
Liquidsoap fails with ALSA (Airtime 2.3 and Ubuntu 12.10)
Hmm, it may be that if the Liquidsoap binary has been compiled with PulseAudio support, and you attempt to use ALSA, it will still attempt to use ALSA, but may error out before that point simply because it may have checked if PulseAudio was availabl…

Comment by Martin Konecny May 2013 permalink
Liquidsoap fails with ALSA (Airtime 2.3 and Ubuntu 12.10)
2013/05/22 17:07:09 [clock.wallclock_pulse:2] Error when starting output pulse_out(liquidsoap:): Pulseaudio error: Connection refused!2013/05/22 17:07:09 [clock.wallclock_pulse:3] Raised by primitive operation at file "", line 0, character…

Comment by Martin Konecny May 2013 permalink
Liquidsoap fails with ALSA (Airtime 2.3 and Ubuntu 12.10)
I see, I will need you to do the following: open /usr/lib/airtime/pypo/bin/airtime-liquidsoap and change line ls_path="/usr/bin/airtime-liquidsoap --verbose -f -d" to ls_path="/usr/bin/airtime-liquidsoap --verbose -f" (simply re…

Comment by Martin Konecny May 2013 permalink
Liquidsoap fails with ALSA (Airtime 2.3 and Ubuntu 12.10)
What's the output of sudo -u pypo /usr/lib/airtime/pypo/bin/airtime-liquidsoap ?

Comment by Martin Konecny May 2013 permalink
Airtime 2.4 beta1!!!
I wonder why mp3gain wasn't installed. You installed with the Debian package? M On May 21, 2013 6:53 PM, "Reaz Baksh" wrote: > mp3gain installed and any new addition shows the relay gain value. Thanks > for this. Since its …

Comment by Martin Konecny May 2013 permalink
Release date for Airtime 2.4 ?
Beta 1 was released today. Go find it in the development subforum :) On Thu, May 16, 2013 at 3:45 PM, Albert FR < airtime-dev@lists.sourcefabric.org> wrote: > the first beta is avalaible on : http://apt.sourcefabric.org/snapshots/ > &…

Comment by Martin Konecny May 2013 permalink
Installation Error with Debian+Plesk11
Please provide the log from Apache error log.

Comment by Martin Konecny May 2013 permalink
Liquid Soap problem. Streaming doesn't work
Ok the next step is to run Liquidsoap manually from the terminal and see what is happening. Please do the following: Open /usr/lib/airtime/pypo/bin/airtime-liquidsoap and change the following line from ls_path="/usr/bin/airtime-liquidsoap -…

Comment by Martin Konecny May 2013 permalink
Airtime package is missing on raring ( 13.04 )
AIrtime 2.4 will bring support for the 13.xx series of Ubuntu. If all goes well a beta will be released today.

Comment by Martin Konecny May 2013 permalink
Is Debian 7 (Wheezy) supported?
Actually Ubuntu has a much longer release cycle if you consider LTS. For example Ubuntu 10.04 released in 2010 will continue receiving support until 2015. Debian Squeeze was released of 2011 February and will only be supported until next year. As …

Comment by Martin Konecny May 2013 permalink
Is Debian 7 (Wheezy) supported?
I would defn recommend 7 over 6. However, the officially supported OS is Ubuntu 12.04. On Mon, May 13, 2013 at 6:19 PM, charos < airtime-support@lists.sourcefabric.org> wrote: > I'm about to setup a (homebrew) dedicated server with …

Comment by Martin Konecny May 2013 permalink
Install Airtime in Parabola (ArchLinux)
Airtime is only supported under Debian based distributions at the moment. On Sun, May 12, 2013 at 6:34 PM, Charlie Vegan < airtime-support@lists.sourcefabric.org> wrote: > how to install Airtime in Parabola (distribution derived from arc…

Comment by Martin Konecny May 2013 permalink
Fresh install, MP3 works, OGG/Vorbis does not.
Try doing a search for OGG + winamp. These players do not natively support OGG. Alternatively try using VLC, which will have built-in support. On Mon, May 13, 2013 at 5:37 PM, Omega < airtime-support@lists.sourcefabric.org> wrote: > H…

Comment by Martin Konecny May 2013 permalink
Airtime audio fails daily
@Craig+Osborne Liquidsoap 1.1.1 final has been released. We will release our Debian packages soon, but in the meantime it would be great if you could compile your own Liquidsoap again and see if the daily silence bug is still affecting you.

Comment by Martin Konecny May 2013 permalink
AirTime 2.2 -- Random silence
Hi Micah, We are still looking into this issue, however are at a dead-end at the moment. One of our users mentioned that connecting to the master source and then disconnecting will restart the stream. Can you verify if you experience the same behavi…

Comment by Martin Konecny May 2013 permalink
Installation Error with Debian+Plesk11
First make sure you edited the correct php.ini file. Most systems have two. Second, post the error logs again. On Mon, May 13, 2013 at 12:33 PM, steven starker < airtime-support@lists.sourcefabric.org> wrote: > done ... but same problem …

Comment by Martin Konecny May 2013 permalink
Installation Error with Debian+Plesk11
@Steve PHP Fatal error: main(): Failed opening required 'Zend/Application.php' > (include_path='/usr/share/airtime/application/controllers/plugins:/usr/share/airtime/application/models:/usr/share/airtime/application/common:.::/us…

Comment by Martin Konecny May 2013 permalink
Some notes on installing Airtime on a clean Ubuntu server.
@Tom, Very nice! BTW, I believe it is virtualmin's fault that your default system encoding/locale was ASCII and not UTF-8. I've installed many Ubuntu systems from scratch (desktop + server), and this is the default. It is only with users …

Comment by Martin Konecny May 2013 permalink
Live Broadcasting = Choppy Playback
Sam, mksafe is activated whenever a source fails (in your case the Mixxx source). Is your server behind some proxy where the input Mixxx input stream is somehow being interrupted?

Comment by Martin Konecny May 2013 permalink
Issues and en_GB.txt
> is there a better/other way to submit issues we find in the code than > through the forums ? There is dev.sourcefabric.org, where you can use your forum account to submit tickets. -- Open source radio in the cloud. Get yours now! -

Comment by Martin Konecny May 2013 permalink
SHOUTcast DNAS
Hi Thomas, Try the following rm -r /var/run/airtime-liquidsoap.pid then restart liquidsoap. Is it "running" now in airtime-check-system?

Comment by Martin Konecny May 2013 permalink
Emergency Situation- Airtime No Sound!
Lisa, you need to tell us what exact steps you are doing to get the log file, and why exactly is it failing. As for reinstall, I doubt that would help. Try sudo chmod a+r /var/log/airtime/pypo/pypo.logcp /var/log/airtime/pypo/pypo.log ~ Now pypo.lo…

Comment by Martin Konecny May 2013 permalink
Emergency Situation- Airtime No Sound!
Try running "sudo chmod a+r /var/log/airtime/pypo/pypo.log" and then you should be able to access it with anything. Same for ls_script.log. On May 10, 2013 1:07 AM, "Lisa Forbes" < airtime-support@lists.sourcefabric.org> w…

Comment by Martin Konecny May 2013 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

Follow Martin Konecny

About

Username: Martin Konecny
Joined: December 2010
Visits: 0
Last Active: August 2015
Roles: Member
Posts: 1,860

Friends

Following 1 person

Followed by 6 people

My Badges

Total Points: 90

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Comments

Comments

Comments

Comments

Comments

Top Posters

Albert FR 1978
Martin Konecny 1860
Andrey Podshivalov 1526
Voisses Tech 1423
John Chewter 899
Daniel James 844
Roger Wilco 784
hoerich 627
Paul Baranowski 389
Cliff Wang 339