Charles Hutton

Howto: Install Airtime on a Raspberry Pi 3!
I'm giving up, as apparently (in spite of the title of the article) it isn't possible to run Airtime on a Pi 3. Chuck

Comment by Charles Hutton October 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Roger: The image you pointed me to will boot on a Pi 2, but not a Pi 3. As this is a Pi 3 exercise, I can't make any progress using your link. Chuck

Comment by Charles Hutton October 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
The image above won't boot on my Pi3, using the same tools I've used to write many images to SD cards. Anything else to try?

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Summarty of issues: (1) the instructions above say to edit ~/airtime-airtime-2.5.1-ga/install_full/ubuntu/airtime-full-install yet later say to run sudo ~/airtime-airtime-2.5.1-ga/install_full/debian/airtime-full-install. Note the edit is in the unu…

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Dan - Re the RTC comment above: I took your article to mean an RTC was incorporated into the Pi 3, since there was no mention of needing external hardware.I see that is not the case.Could you add a few words for clarity? Otherwise, people will assu…

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
And another thing: You have us editing In ~/airtime-airtime-2.5.1-ga/install_full/ubuntu/airtime-full-install Yet the following line references the debian folder: Then runsudo ~/airtime-airtime-2.5.1-ga/install_full/debian/airtime-full-install Unti…

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
One more thing: I mentioned above that sources.list points to jessie, not wheezy. I've been changing that, but I'd love to see you say that's correct. Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Dan: I've reloaded an image several times. I'm using a jessie lite image (since your artucle points to it) but you and Roger keep mentioning "jessie" instead of "jessie lite". Does it matter? BTW, I've never been a…

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Still waiting for specific advice, Roger.While you have (assumedly) much knowledge, you don't express it in a way that helps those who know less. Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
As usual, your advice is not specific.As written above, I changed "sources.list" to say "wheezy" rather than "jessie".Are you saying I must revert to wheezy load in entirety? Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
With the lack of any specific advice, I changed the first line of sources.list to say "wheezy" instead of "jessie". Unfortunately, that didn't get me to the finish line. Here's what I got: lame is already the newest ver…

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Dan: I did notice in sources.list that the first line points to a jessie folder for non-free. Should it be wheezy?I assume this has nothing to do with the keyring issue. Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Dan:After all my playing around, I had done a fresh load of Noobs. The /etc/apt/sources.list (note my path - it doesn't match yours) has only 3 lines and no mention of sourcefabric.I still have the same keyring error.Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Great, but that post is entirely philosophical. There's no conclusion. There's no mention of support for the Pi. Again, can anyone tell me how to solve the keyring problem? Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
2.5.x is not supported? Surely 2.5.2 is supported. And if 2.5.1 is the only choice, I'll take it, So what has to be done to correct the keyring problem? And is there interest in making 2.5.2 run on the Pi 3? I would hope so! Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Roger - So what all needs to change? Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
FWIW: An apt-get install sourcefabric-keyring also results in "Unable to locate package sourcefabric-keyring". Chuck

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
Dan - You mostly solved it. Reason: when I edited sudo ~/airtime-airtime-2.5.1-ga/install_full/debian/airtime-full-install , the changes were rejected without botification. When I realized that, I used nano instead and made the changes. But after ma…

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
To help anyone who might be able to solve this, here's what I am getting: W: GPG error: http://apt.sourcefabric.org jessie InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 0888FE5B…

Comment by Charles Hutton September 2016 permalink
Howto: Install Airtime on a Raspberry Pi 3!
When I do the install in step #5, I'm told it can;t find the armhf package. How to fix this? Chuck

Comment by Charles Hutton September 2016 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Follow Charles Hutton

About

Username: Charles Hutton
Joined: September 2016
Visits: 0
Last Active: July 2017
Roles: Member
Posts: 22

Friends

My Badges

Total Points: 50

Charles Hutton

Howdy, Stranger!

About

Friends

My Badges

Top Posters