Verheek

rabbitmq-server fails to install
It's a weird one. If I run essentially what the init script start command does: sudo /usr/sbin/rabbitmq-multi 1 I get the normal sudo password prompt and then another one. After that fails I get Quote:su: Authentication failure…

Comment by Verheek March 2011 permalink
rabbitmq-server fails to install
OK the issue is actually the rabbitmq server is hanging on start-up. Played around with the hosts file as per various posts but still hanging. Any ideas? Jeremy

Comment by Verheek March 2011 permalink
Sound and library problems
It's not so much that that it has to be restarted at the beginning of a show but the ability to jump into the proper program and time within that program should the server have to be rebooted, the show contents be changed a late program be adde…

Comment by Verheek March 2011 permalink
Stream Meta-data Bug?
Great!

Comment by Verheek March 2011 permalink
Sound and library problems
Regarding: Quote:If I reboot my Airtime machine, reload Airtime then schedule a few shows, the first show generally won't play. But, it will usually sync again at the next playlist(not next file). I believe this is an airtime setting but i…

Comment by Verheek March 2011 permalink
Auto-install Script for Debian 6
Sweet! Now if they don't go and change the install page we'll be all set!

Comment by Verheek March 2011 permalink
No Streaming
I went back to America/Toronto and it self-started at the next playlist start and ran 16 minutes before going offline. However I just realized I had inadvertently installed the 1.7_alpha again and not the 1.6.1 so this is probably still the cau…

Comment by Verheek March 2011 permalink
No Streaming
Thanks Paul. I went back to a fresh copy of 1.6.1 per the install page and a couple minutes into the first song it went off air again. Jeremy

Comment by Verheek March 2011 permalink
No Streaming
Mid-song Airtime went from on air to off. The interface carried on but my playback is says offline. I had just started a 40 min schedule of songs I have played before. I have an up-to-date lucid and git pull of Airtime. I had just re-ins…

Comment by Verheek March 2011 permalink
Accessing Airtime's output without any delay for feeding into phone system.
Could Darkice also be used to send the stream to the remote icecast? This could stream from a Jack server with airtime connected using alsa to jack and whatever else as Jack plugs as well. A local sound card connected to Alsa could still be used f…

Comment by Verheek March 2011 permalink
Commercial use ?
I'll second that one radioa6! Jeremy

Comment by Verheek March 2011 permalink
Resync playback and web interface
Ok I found out it syncs up at the start of the next playlist. Jeremy

Comment by Verheek March 2011 permalink
Airtime 1.6.1 out now!
Thanks Martin. I like to git pull on the master to see what's new each day.

Comment by Verheek March 2011 permalink
Airtime 1.6.1 out now!
I updated from the latest git but the login screen still shows 1.6.0 Is there another way to verify the version? Jeremy

Comment by Verheek March 2011 permalink
Re: Airtime dropping stream one hour into a show
I have not scheduled playlists more than one hour but the shows run 24 hours with repeating 1 hour playlists of the same songs and that is OK. But what did happen was that the playout and interface songs were different. I cloned the latest git la…

Comment by Verheek February 2011 permalink
aac+ stream
Great! Someone should probably try it to be sure it works. Mine works but I might have missed something in the post. Jeremy

Comment by Verheek February 2011 permalink
Can't change file Metadata
Well it was both because the metadata wasn't converted but then I couldn't manually enter either. In anycase both are solved now. Thanks!

Comment by Verheek February 2011 permalink
aac+ stream
oops. Sorry to jump the gun. Thought it might be useful. Jeremy

Comment by Verheek February 2011 permalink
Can't change file Metadata
Yes the metadata was lost in conversion. Jeremy

Comment by Verheek February 2011 permalink
Post install questions
Yes, ReplayGain looks quite promising! I'm thinking some stations may use content of various compression ratios between voice and different music styles. Jeremy

Comment by Verheek February 2011 permalink
Install problem
For the time being, I edited Airtime/pypo/scripts/ls_config.liq and ls_script.liq and then reinstalled Pypo. Airtime/pypo/install/pypo-install.py . Then restarted Icecast2. This got the metadata in Icecast changed. Jeremy

Comment by Verheek February 2011 permalink
Post install questions
Well in the radio industry a processor would be used before the transmitter. Is such a thing needed for webradio? Maybe even just for levelling? Normalizing will not do the same job although a worthwhile feature. As far as jack, I installed …

Comment by Verheek February 2011 permalink
Scheduling Calendar Deletions
Ok. Thanks for the consideration.

Comment by Verheek February 2011 permalink
Scheduling Calendar
I did like the fact it went to the panel with the error. Overall it was a nice layout it was just tricky that it opened downwards on lower res screens which can be the case with servers. I'll install the updates and see what it's like. …

Comment by Verheek February 2011 permalink
Streaming with Airtime
Thanks for the tip. The good news is that liquidsoap is working now having loaded snd-aloop from Alsa 1.0.23. I compiled and installed alsa-drivers, alsa-libs, and alsa-utils according to the INSTALL file in each and this page: http:// mone…

Comment by Verheek February 2011 permalink
Streaming with Airtime
Ok I have checked and completed everything above. I still have one error and it's relating to Alsa. It just occured to me, reading the last line above, that I am using a server with no sound card. In the past I used snd_aloop to create …

Comment by Verheek February 2011 permalink
Streaming with Airtime
Hi Martin, Thanks, yes, I've copied my compiled liquidsoap as you suggest above and reran the install. I checked that it had copied to the liquidsoap sub-folder of /opt and indeed it had. However, I still get the same error about Pulseau…

Comment by Verheek February 2011 permalink
Streaming with Airtime
Great! I installed Camomile from source although there seems to be a .deb . I suppose libgavl and Camomile have to do with the package config of liquidsoap not matching the setup page for liquidsoap. I guess it's necessary to copy the new li…

Comment by Verheek February 2011 permalink
Streaming with Airtime
So after installing libgavl with apt-get I reran sudo -u pypo /opt/pypo/bin/liquidsoap/liquidsoap /opt/pypo/bin/scripts/ls_script.liq and I got: Quote:Fatal error: exception Sys_error("/usr/share/camomile/database/general_categ…

Comment by Verheek February 2011 permalink
Streaming with Airtime
However, if I run cd liquidsoap/src && ./liquidsoap 'output.icecast(%vorbis, mount="test.ogg", sine())' it creates an ogg sine wave output mountpoint as expected. So I'm pretty sure my liquidsoap and Icecast2 are se…

Comment by Verheek February 2011 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Follow Verheek

About

Username: Verheek
Joined: January 2011
Visits: 0
Last Active: December 2015
Roles: Member
Posts: 158

Friends

My Badges

Total Points: 80

Verheek

Howdy, Stranger!

About

Friends

My Badges

Top Posters