Martin Konecny

Repeat Playlist
A repeated show does not copy the contents of the original show. If you want repeating shows to have the same content, a workaround is to create 1 playlist and schedule it in every show.

Comment by Martin Konecny June 2012 permalink
Feature request: Volume adjustment slider
Not sure if we need that at the moment. Problem is that there is a huge delay when you are streaming over the net, and you could be fiddling with the volume and turning it too high, then too low as there is no immediate feedback to your ears. Perha…

Comment by Martin Konecny June 2012 permalink
Airtime 2.1 Playout Problem
Not sure step one is necessary (you should be able to select the supported locale from the dpkg-reconfigure program), but glad you got it working :)

Comment by Martin Konecny June 2012 permalink
Weekly schedule not showing on website
Hi, This ticket has been closed in http://dev.sourcefabric.org/browse/CC-3957 If you used Dominic's workaround, you should remove it for 2.1.1. Thanks for the temporary fix Dominic :)

Comment by Martin Konecny June 2012 permalink
Installation issue.
What is the output of sudo monit status ?

Comment by Martin Konecny June 2012 permalink
Airtime Installation Error
Reply to @Solvik: Try removing the package with sudo apt-get purge airtime and reinstall. I think it didn't install properly because your locale wasn't set up, I'll look into this...

Comment by Martin Konecny June 2012 permalink
Airtime 2.1 Playout Problem
You need to make sure the locale has "UTF-8" attached to the end.

Comment by Martin Konecny June 2012 permalink
Airtime 2.1 - Airtime goes offline but progress bars still running.
@Marcin, Is icecast on the same machine as liquidsoap? Seems like the network connection between Liquidsoap and icecast went down.

Comment by Martin Konecny June 2012 permalink
Feature request: Volume adjustment slider
The best way to do it is probably use ReplayGain http://en.wikipedia.org/wiki/ReplayGain Which is supported by Liquidsoap. We have this planned for the future at the moment...

Comment by Martin Konecny June 2012 permalink
Airtime 2.1.0 RC2
Ticket created. http://dev.sourcefabric.org/browse/CC-3962

Comment by Martin Konecny June 2012 permalink
2.0.3 not recording shows
We'll look into this more. At the moment it seems you can run multiple instances of ecasound at the same time (which would be ideal as one ecasound is starting as the other is finishing up writing to a file). It doesn't seem to be an impo…

Comment by Martin Konecny June 2012 permalink
[SOLVED] Metadata on "Master Source" not showing
Good to hear you fixed your problem. I think that whatever metadata is passed in to "Master Source" is forwarded on to icecast.

Comment by Martin Konecny June 2012 permalink
[SOLVED] Watch Folder permissions requirements?
Hey, The files needs to be readable by users www-data (so that you can preview it via web interface), and by user pypo (so our playout engine can read the file). So just add those two users into some group that can read your files (to avoid chmod 77…

Comment by Martin Konecny June 2012 permalink
Airtime 2.1 with Ubuntu Maverick - problems, problems
If you run sudo apt-get remove airtime from the command-line, what is the output?

Comment by Martin Konecny June 2012 permalink
Re-Installation Fail airtime_2.1.0-1_all.deb
You don't need to modify the Airtime config files to use port 443. Leave this as port 80 so that the playout / media-monitor services can communicate via normal http. You only needs to modify apache config to support https access.

Comment by Martin Konecny June 2012 permalink
Shows not appearing in calendar view for DJs
Please save this file to your computer https://raw.github.com/sourcefabric/Airtime/2.1.x/airtime_mvc/application/models/Show.php and overwrite your existing one. Please let us know if it fixes your problem. When you upgrade to 2.1.1 this manual modi…

Comment by Martin Konecny June 2012 permalink
Shows not appearing in calendar view for DJs
Hi Alexandru, Sounds like you found a bug in 2.1.0 that we fixed a few days ago. We will be posting a 2.1.1 patch soon that will address this.

Comment by Martin Konecny June 2012 permalink
Installation issue.
This was fixed in Airtime 2.1.0. Sounds like you are downloading a 2.0 release?

Comment by Martin Konecny June 2012 permalink
Can't install.
After you setup airtime-easy-setup, I believe you simply type sudo apt-get updatesudo apt-get install airtime The reason for the easy-setup package is to prepare your system to download from Sourcefabric's servers as opposed to Ubuntu's se…

Comment by Martin Konecny June 2012 permalink
organizing off airplay w. liquidsoap
Reply to @stefan+s: Exactly as the error message says, there is a variable that isn't being used, and so Liquidsoap is refusing to start. Did you remove a part of the code that uses this variable?

Comment by Martin Konecny June 2012 permalink
Airtime Installation Error
Reply to @Solvik: Any luck?

Comment by Martin Konecny June 2012 permalink
Airtime 2.1 Playout Problem
Reply to @Karim+Ali: I took a look at your logs and see the following: 2012-06-09 20:15:32,075 DEBUG - [pypocli.py : configure_locale() : line 54] - Before ANSI_X3.4-19682012-06-09 20:15:32,075 DEBUG - [pypocli.py : configure_locale() : line 58] - …

Comment by Martin Konecny June 2012 permalink
Show Properties
Please create a ticket at dev.sourcefabric.org so we can consider it for future releases.

Comment by Martin Konecny June 2012 permalink
Show Properties
Currently whenever you create a repeating show, all instances are tied to the same show "template", which stores the name, description etc. As you mentioned the only way to break free of this at the moment is to create each show individual…

Comment by Martin Konecny June 2012 permalink
2.0.3 not recording shows
Reply to @Marcin+Tym: Yup that's an embarassing race condition we have. I was actually going to patch that this weekend until I realized that you can in fact have multiple ecasound processes reading from the microphone input (at least during m…

Comment by Martin Konecny June 2012 permalink
2.0.3 not recording shows
Did you apply the "export TERM=xterm" fix? This will be included by us in the 2.1.1 release.

Comment by Martin Konecny June 2012 permalink
Airtime 2.1.0 RC2
I think I know what's happening here. Probably on reboot Airtime media-monitor starts before your network drive is mounted, and as a result it disables many files in your database from appearing in the Web UI. What software is used to mount you…

Comment by Martin Konecny June 2012 permalink
2.1.0 showing ON AIR and stream connected when there is no stream connected..
If I then close my streaming client, it disconnects the stream and ON AIR goes off, however the stream is still 'available' to reconnect. I can reconnect the stream even though nothing is there! I just tried this, and as soon as the clie…

Comment by Martin Konecny June 2012 permalink
The widgets' data source
Hey, Look into airtime_mvc/application/controllers/ApiController.php Function name weekInfoAction(); The URL don't map to files when you use an MVC framework, it is all virtualized :)

Comment by Martin Konecny June 2012 permalink
Airtime 2.1 Install Error
@Artem, I took a look at the screenshot you posted and see there is no textfield for username. Most software that doesn't ask for this from the user automatically sends "source" as the username. I'm not sure if this is the proble…

Comment by Martin Konecny June 2012 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

Follow Martin Konecny

About

Username: Martin Konecny
Joined: December 2010
Visits: 0
Last Active: August 2015
Roles: Member
Posts: 1,860

Friends

Following 1 person

Followed by 6 people

My Badges

Total Points: 90

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Anniversary

Comments

Comments

Comments

Comments

Comments

Top Posters

Albert FR 1978
Martin Konecny 1860
Andrey Podshivalov 1526
Voisses Tech 1423
John Chewter 899
Daniel James 844
Roger Wilco 784
hoerich 627
Paul Baranowski 389
Cliff Wang 339