Install Airtime – open source radio automation software
  • Vote Up0Vote Down Janis TriblisJanis Triblis
    Posts: 15Member

    My question is, after this installation process did I need to do anything else?

    Or that's it. And I can run Airtime with out any problems. What about the cache? How to clean the cache, or I ,don't need worry about that? 

    Thx :)

    With Regards Janis.


    $ sudo wget http://apt.sourcefabric.org/misc/airtime-easy-setup.deb
    $ sudo apt-get install gdebi

    $ sudo gdebi airtime-easy-setup.deb

    Unpacking airtime-easy-setup (from airtime-easy-setup.deb) …
    Setting up airtime-easy-setup (2.3.0-1) …
    Installing Sourcefabric package signing key…
    OK
    Setting up Airtime for Etc/UTC timezone…
    Setting Icecast and Airtime domain names to ip-10-xxx-yy-74.ec2.internal…
    Setting defaults for non-interactive installation…
    Checking that the server has a UTF-8 locale…
    en_US.UTF-8 is the default locale on this server and appears to support UTF-8 encoding.

    Now please run the commands:

    sudo apt-get update
    sudo apt-get install airtime

    After that, installation of Airtime should be complete in a couple of minutes.

    You should then be able to log in to Airtime at http://ip-10-xxx-yy-74.ec2.internal/
    Processing triggers for man-db …

    Install Airtime

    $ sudo apt-get update
    $ sudo apt-get install airtime

    *** Verifying your system environment, running airtime-check-system ***
    AIRTIME_STATUS_URL = http://ip-10-xxx-yy-74.ec2.internal:80/api/status/format/json/api_key/%%api_key%%
    AIRTIME_SERVER_RESPONDING = OK
    KERNEL_VERSION = 3.5.0-21-generic
    MACHINE_ARCHITECTURE = x86_64
    TOTAL_MEMORY_MBYTES = 604072
    TOTAL_SWAP_MBYTES = 0
    AIRTIME_VERSION = 2.3.0
    OS = Ubuntu 12.10 x86_64
    CPU = Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
    WEB_SERVER = Apache/2.2.22 (Ubuntu)
    PLAYOUT_ENGINE_PROCESS_ID = 19766
    PLAYOUT_ENGINE_RUNNING_SECONDS = 32
    PLAYOUT_ENGINE_MEM_PERC = 2.6%
    PLAYOUT_ENGINE_CPU_PERC = 0.9%
    LIQUIDSOAP_PROCESS_ID = 19801
    LIQUIDSOAP_RUNNING_SECONDS = 31
    LIQUIDSOAP_MEM_PERC = 3.4%
    LIQUIDSOAP_CPU_PERC = 7.9%
    MEDIA_MONITOR_PROCESS_ID = 19701
    MEDIA_MONITOR_RUNNING_SECONDS = 38
    MEDIA_MONITOR_MEM_PERC = 2.4%
    MEDIA_MONITOR_CPU_PERC = 0.0%
    RABBITMQ_PROCESS_ID = 16705
    RABBITMQ_RUNNING_SECONDS = 427
    RABBITMQ_MEM_PERC = 4.8%
    RABBITMQ_CPU_PERC = 0.9%
    – Your installation of Airtime looks OK!

    ******************************* Install Complete *******************************
    Setting up liquidsoap-plugin-faad (1.0.1+repack1-1) …
    Processing triggers for libc-bin …
    ldconfig deferred processing now taking place


  • 1 Comment sorted by
  • Vote Up0Vote Down hoerichhoerich
    Posts: 627Member, Airtime Moderator
    Hy Janis,
    it depends on what you want to with Airtime.

    At least you should configure your Input-Source (Master- & Showsource), Output-Stream-Settings and setup users like shown here => http://forum.sourcefabric.org/discussion/comment/25108#Comment_25108

    You should also read the points of the manual regarding "Administration" and "Advanced Configuration" => http://en.flossmanuals.net/airtime/using-the-import-script/

    greetz, hoerich
    Post edited by hoerich at 2013-07-07 16:06:54
    Official Airtime Forum Manager
    --------------------------
    Most of the time an issue is located between keyboard and chair.
Add a Comment