[livesupport-dev] install procedure - Airtime Development Discussions on Sourcefabric Forum

import

hi michael, doug, akos,

i moved this to the dev list Wink

the question is: what happens when i boot the machine from the install CD
of livesupport.

the reason i move this to the dev list: i don't really know...

NETWORK
---------------------------
use scenario A:

2 machines for livesupport. one the datastorage / remote admin and one for
the live mode in the studio.

what do i do?

a) install the datastorage with the install CD. set the network
configuration have an IP address. all is fine.

b) install the studio live machine with the install CD. so NOW the install
process needs to ask me: where is the datastorage? what's the IP? what else
does it need to ask? how to connect to postgresql?

---------------------------
use scenario B:

1 mighty machine with the one in all.

does the install now only need one IP address???

SOUNDCARD
---------------------------
during the installation process, how can i determine the use of which
soundcard? the maximum number will be three in one machine (not recommended
but possible in use scenario B).

1. live for transmission
2. preview for DJ
3. scheduler for transmission

does the install process ask you which to use for what and how will you
decide if they are all the same? does it play sounds and asks you what to
do with the one that just beeped?

Micz Flor - micz@mi.cz

content and media development http://mi.cz
-----------------------------------------------------------------
http://www.campware.org -- http://crash.mi.cz -- http://suemi.de
"5. HOW TOs
X ?
?
X X
X X." (John Pye)
-----------------------------------------------------------------

------------------------------------------
Posted to Phorum via PhorumMail

import

Micz Flor wrote:

> b) install the studio live machine with the install CD. so
NOW the

> install process needs to ask me: where is the
datastorage......

I booted our first Knoppix with live support integration (Studio
to Go Fervent Software).

Here are some of my beginners experiences .

From Live CD boot:

From my experience, during the first live cd boot , the system
recognized both of my soundcards

and allowed me to controll them individually from linux system
mixer.

Vmware install from Windows:

I haven't seen default working soundcard, network card (NAT) and
disks in the system , right away

(I suppose because I didn't install StudioToGo on hard disc? Or
did I miss something?), and I haven't

found Live Support application in Start panel. But I suppose that
Live Support system is not completely

integrated yet into the live cd, and that is why I don't see it ?

>SOUNDCARD

>........

>3. scheduler for transmission

I dont understand. What excatly do you mean for that audio card output
?

best,

Robert

Micz Flor wrote:

type="cite">hi michael, doug, akos,

i moved this to the dev list

the question is: what happens when i boot the machine from the install
CD of livesupport.

the reason i move this to the dev list: i don't really know...

NETWORK

---------------------------

use scenario A:

2 machines for livesupport. one the datastorage / remote admin and one
for the live mode in the studio.

what do i do?

a) install the datastorage with the install CD. set the network
configuration have an IP address. all is fine.

b) install the studio live machine with the install CD. so NOW the
install process needs to ask me: where is the datastorage? what's the
IP? what else does it need to ask? how to connect to postgresql?

---------------------------

use scenario B:

1 mighty machine with the one in all.

does the install now only need one IP address???

SOUNDCARD

---------------------------

during the installation process, how can i determine the use of which
soundcard? the maximum number will be three in one machine (not
recommended but possible in use scenario B).

1. live for transmission

2. preview for DJ

3. scheduler for transmission

does the install process ask you which to use for what and how will you
decide if they are all the same? does it play sounds and asks you what
to do with the one that just beeped?

Micz Flor - micz@mi.cz

content and media development http://mi.cz

-----------------------------------------------------------------

http://www.campware.org -- http://crash.mi.cz -- http://suemi.de

"5. HOW TOs

X ?

?

X X

X X." (John Pye)

-----------------------------------------------------------------

--

href="potpis%20jednostavan_files/editdata.mso">

name="_MailAutoSig">

style="color: rgb(255, 128, 0);" lang="SR">

style="font-family: Arial; color: rgb(255, 128, 0); font-weight: normal;"
lang="SR">Robert Klajn style="font-family: Arial; color: rgb(255, 128, 0);" lang="SR">

style="font-size: 10pt; font-family: Arial; color: rgb(255, 128, 0);"
lang="HR">

style="font-size: 10pt; font-family: Wingdings; color: rgb(153, 153, 153);"
lang="HR">* style="font-size: 10pt; font-family: Arial; color: rgb(153, 153, 153);"
lang="HR"> style="font-size: 7pt; font-family: Arial; color: rgb(153, 153, 153);"
lang="HR"> klajn@b92.net style="font-size: 10pt; font-family: Arial; color: rgb(255, 128, 0);"
lang="HR"> style="font-size: 10pt; font-family: Wingdings; color: rgb(255, 128, 0);"
lang="HR"> style="font-size: 7pt; font-family: Arial; color: rgb(255, 128, 0);"
lang="HR"> lang="SR">

style="font-size: 7pt; font-family: Tahoma; color: rgb(255, 128, 0);"
lang="HR">

------------------------------------------
Posted to Phorum via PhorumMail

import

well. I was awaiting some clarifications here too.
I refer to it as introduced by debian-packages and install flavours as
studio (the GUI) and station (scheduler, webinterface, storageserver ...
all the rest..)

- its obvious the studio needs a (configured) remote host to connect to

- for a station setup (as well as including the studio) this is
reasonable configured via localhost. web interface asks for more
necessary setting on first login.
as far as I see, this is usable as such locally and remotely (assuming
the system has an ip) ... so we are fine? or would this need more
configuration?

> ---------------------------
> use scenario A:
>
> 2 machines for livesupport. one the datastorage / remote admin and one
> for
> the live mode in the studio.
>
> what do i do?
>
> a) install the datastorage with the install CD. set the network
> configuration have an IP address. all is fine.
>
> b) install the studio live machine with the install CD. so NOW the
> install
> process needs to ask me: where is the datastorage? what's the IP? what
> else
> does it need to ask? how to connect to postgresql?
>
> ---------------------------
> use scenario B:
>
> 1 mighty machine with the one in all.
>
> does the install now only need one IP address???

------------------------------------------
Posted to Phorum via PhorumMail

Howdy, Stranger!

Categories

Poll

Top Posters