Relay scheduled in version 2.2.0? - Airtime Support Discussions on Sourcefabric Forum

Edilson R Chiquetano

Is it possible to make the relay with another radio schedule in version 2.2.0?
Where is this option?
How to enable this service?

Cliff Wang

Does Webstream meet your requirement? You can set another radio's stream as Webstream, then schedule that Webstream into your own show.

Albert FR

but copy/paste shows is always not here...

Edilson R Chiquetano

OK worked, the connection with the external radio happened on schedule, but no audio. At the time that the radio is relayed no external sound.
I have to configure some file to have the audio rebroadcast?

Albert FR

in the library you need to create a webstream (give the adress of your relay) and put it into a show

Edilson R Chiquetano

Albert, I did it.
The connection happened on schedule, but the sound is not reproduced.
Is muted during the scheduled time.

Edilson R Chiquetano

Albert,

After my Webstream created when I click the "Preview Stream" also not has the audio in the player.

Simply mutes!

Albert FR

perhaps the link is not good

if it is an icecast stream, give the real name, for example :

http://www.example.org:8000/radio.ogg

but not

http://www.example.org:8000/radio.ogg.m3u

and for shoutcast (but i've never tested it : playlist.pls

Edilson R Chiquetano · Post edited by Edilson R Chiquetano at 2012-10-08 18:44:12

I was writing the address: http://www.example.org:8000 only.

To Icecast address http://www.example.org:8000/aitime_128 worked perfectly
To Shoutcast address http://www.example.org:8000/playlist.pls
displays the error: In the MIME type is found webstream.
To Shoutcast address http://www.example.org:8000/
message displays: Webstream saved.

But not the radio relay

Anyone know with shoutcast relay too?

Albert FR

you can"t have icecast and shoutcast on the same port...
shoutcast using 2 ports to stream are you on the good one ?

Edilson R Chiquetano

I use shoutcast and icecast on different port on my server.
Icecast: 8000
Shoutcast 8006

I want to relay on other radio shoutcast. Ex: http://www.radioxxxx.org:8010

How to do this? Is it possible? Will Airtime has a bug in that is not allowing relaying.

Albert FR

If I understand you want relaying airtime stream on an other shoutcast stream
you can do that, directly with shoutcast 2 (no 1.x)
you only need to configure the shoutcast receiver to do that

Edilson R Chiquetano

I do not want to relay my Airtime on radio shoutcast.
I do the opposite!

I want to relay a shoutcast radio on my radio on any Airtime.

Example: I want retransmistir football game to be broadcast by ABC radio on my radio Aitime.

ABC Radio = Shoutcast
My Radio Airtime = (shoutcast and icecast)

ABC Radio                                                   Airtime
Shoutcast   >> Football >>>>>>>>>>>>>> Icescast >>> Relay Football >>>>>>>
Port: 8010                                                   Port: 8000

Albert FR · Post edited by Albert FR at 2012-10-10 08:09:06

ok I understand ;-)
shoutcast working well with mp3 stream, not aac+ with airtime
aac+ is a proprietary codec not installed by default on airtime
you can install it manually (information are available on the wiki) but only if your stream is less important than 64kbs...

Edilson R Chiquetano

Just to summarize.
This all means that it is impossible to relay shoutcast in airtime.
I can only relay icecast.
Ok?

Albert FR · Post edited by Albert FR at 2012-10-10 12:49:28

no you don't understand, you say, you want to relay abc radio to airtime.
I only said that's possible with mp3 shoutcast, not aac+ shoutcast
abc radio stream with aac+

ABC Radio                                                   Airtime

Shoutcast   >> Football >>>>>>>>>>>>>> Icescast >>> Relay Football >>>>>>>

AAC+                                                          only MP3                                 xxx

Edilson R Chiquetano

Albert,

But that's what I'm having to do.
I want to relay a Shoutcast MP3 radio. But Airtime not retransmits the radio set in Webstream.
Although the airtime recognizes the URL Stream (eg http://brhp.net:8002) no retransmission occurs.

The Airtime is only relaying radio Icecast.
Make yourself a test!

Tanks

Kahuitel · Post edited by Kahuitel at 2012-10-28 05:21:23

I can manage to preview a shoutcast stream by typing http://stream.example.com:8000/;

(Add a semicolumn at the end of the url : ";")

But when it's planned into a show, it does not work (off air mode).

Martin Konecny

Reply to @Edilson+R+Chiquetano:

Please share the URL you are trying to rebroadcast. Airtime should handle Shoutcast streams just fine.

Kahuitel

Here is a shoutcast URL I can't manage to relay : http://stream.radiocapsule.com:8000/

Typing http://stream.radiocapsule.com:8000/; make it available for preview but still not play.

http://stream.radiocapsule.com:8000/listen.pls is not allowed by MIME Type.

Thanks for your help. =)

Frank Linhares

Has anyone resolved this issue?

I can add a webstream and I can hear the webstream when I preview it but when the schedule for said webstream kicks in there is no audio or eve a mountpoint on my icecast server.

I have tried the ogg, mp3 and shoutcast version of the stream with no luck.

The stream is http://twit.am/listen

Thanks.

Martin Konecny

If you don't have a mountpoint on your icecast server, that looks to be the root of your problem. You should always have a mountpoint, even when nothing is scheduled (in this case silence is streaming).

Frank Linhares

Well the mount point is always there until a schedule with the stream comes on, then the mount point crashes and I get nothing.

Mark Lastname · Post edited by Mark Lastname at 2013-02-28 04:11:23

Martin, you really don't get it. So pay attention while I try to explain this issue to you and in general, please guys, stop filling in the blanks with unrelated suggestions. People are trying hard to explain the issue to you, but we keep seeing out of context remarks while the problem remains.

So follow me in this procedure:

1) Library -> New -> Webstream

2) Add a stream URL. In my case: http://stream1.fralnet.com:8000/; -- this is WITH the semicolon. It's a shoutcast source with normal mp3 -- no AAC or whatever.

3) Click save and then preview it. In a new window the airtime preview player comes up and it plays the stream successfully. So this suggests that it all works.

4) But then you try to add this new webstream from your library into a playlist. Say Airtime contains a playlist with a song from the library, and then the webstream, and then another song. What you hear is song, silence (no relay), song. So something is not relaying, when it should.

Do you understand what I mean? *Crosses thumbs*

This has nothing to do with mountpoints. It has to do with RELAYING from somewhere on the Internet to an already existent mountpoint.

Albert FR

that's working fine for me

can you send your logs ? (pypo logs)

Mark Lastname

Actually I found the solution, and a better way to do this. So! Let's get started.

In /etc/icecast2/icecast.xml add a relay:

<relay>

<server>stream1.fralnet.com</server>

<local-mount>/nagradio</local-mount>

<on-demand>1</on-demand>

<relay-shoutcast-metadata>1</relay-shoutcast-metadata>

</relay>

If you want to hide your relay from the list on your icecast2 page, add:

<mount>

<mount-name>/nagradio</mount-name>

</mount>

Now, add this mountpoint in Airtime. Simply add http://127.0.0.1:8000/nagradio as a stream URL and voilà! =D>

Martin Konecny

We receive many forum questions everyday with very incomplete information
and filling in this information is a must. No where in this thread was it
mentioned that the mount point only disappears when the stream is scheduled
to start. That suggests the play out engine Liquidsoap is crashing for some
streams. We will look into this....
On Feb 28, 2013 4:08 AM, "Mark Lastname" <<br />airtime-support@lists.sourcefabric.org> wrote:

> Martin, you really don't get it. So pay attention while I try to explain
> this issue to you and please, stop filling in the blanks with unrelated
> suggestions. People are trying hard to explain the issue to you, but you
> keep replying with out of context remarks.
>
> So follow me in this procedure:
>
> 1) Library -> New -> Webstream
> 2) Add a stream URL. In my case: http://stream1.fralnet.com:8000/; --
> this is WITH the semicolon. It's a shoutcast source with normal mp3

Martin Konecny

http://stream1.fralnet.com:8000/;

with a semicolon doesn't work on my machine. Taking out the semicolon works.

Thomas Hackett · Post edited by Thomas Hackett at 2013-09-25 12:58:54

Hi, In Airtime 2.4.1 I also get:

No MIME type found for webstream.

for a whole bunch of stations, for instance:

http://stream-54.shoutcast.com:80/the80s_skyfm_mp3_96kbps

_{Network received: 1696221 Bytes}_{Server: Ultravox/2.1 SHOUTcast v2.2.0.101[F]/posix(linux x64)}_{Content-Type: audio/mpeg}_{Ultravox sync: 1169 messages, 0 desyncs}_{Ultravox Data Message: 0x7000}_{Ultravox SID/AvgBR/MaxBR: 1/96000/96000}_{Stream name: 80s, 80s, 80s! - SKY.FM - Hear your classic favorites right here! (www.sky.fm)}_{Current title: Olivia Newton-John - Physical}

Works fine in WinAmp

Voisses Tech

My Answer below is relevant
http://forum.sourcefabric.org/discussion/15914/no-mime-type-found-for-webstream-airtime-v2-4-1

Its not an Airtime problem but that liquidsoap cannot parse the stream
Audio format (bin) is not compatible with liquidsoap

Howdy, Stranger!

Categories

Poll

Top Posters