[livesupport-dev] experimental data
  • Hi all,

    I put together an old box and installed the ls live cd knoppix on it.
    After purging the old ls packages and adding the new ones, everything
    started fine, but.

    If I set any of the audio devices (scheduler, live mode, cue) to
    plughw:0, /dev/dsp or /dev/dsp1, it works. (I only have 2 sound cards.)
    If I set it to plughw:1 (or plughw:1,0, hw:1, hw:1,0), there is no
    sound, although xmms works with device=hw:1,0. This is very strange indeed.

    Does anybody have any suggestions how this is possible?

    Ferenc

    ------------------------------------------
    Posted to Phorum via PhorumMail
  • 2 Comments sorted by
  • Ferenc,

    Do you have a sound-server service running that lock you 1 ?

    Frans van Berckel

    On Fri, 2005-08-12 at 14:54, Ferenc Gerlits wrote:
    > Hi all,
    >
    > I put together an old box and installed the ls live cd knoppix on it.
    > After purging the old ls packages and adding the new ones, everything
    > started fine, but.
    >
    > If I set any of the audio devices (scheduler, live mode, cue) to
    > plughw:0, /dev/dsp or /dev/dsp1, it works. (I only have 2 sound cards.)
    > If I set it to plughw:1 (or plughw:1,0, hw:1, hw:1,0), there is no
    > sound, although xmms works with device=hw:1,0. This is very strange indeed.
    >
    > Does anybody have any suggestions how this is possible?
    >
    > Ferenc
    >

    ------------------------------------------
    Posted to Phorum via PhorumMail
  • Ferenc,

    Is there a deference in the settings for the first or the second card?

    dmix on the first and second yes-no-set
    bid-rate on the first and second 48000 vs 44100

    Frans van Berckel

    On Fri, 2005-08-12 at 15:12, Frans van Berckel wrote:
    > Ferenc,
    >
    > Do you have a sound-server service running that lock you 1 ?
    >
    > Frans van Berckel
    >
    > On Fri, 2005-08-12 at 14:54, Ferenc Gerlits wrote:
    > > Hi all,
    > >
    > > I put together an old box and installed the ls live cd knoppix on it.
    > > After purging the old ls packages and adding the new ones, everything
    > > started fine, but.
    > >
    > > If I set any of the audio devices (scheduler, live mode, cue) to
    > > plughw:0, /dev/dsp or /dev/dsp1, it works. (I only have 2 sound cards.)
    > > If I set it to plughw:1 (or plughw:1,0, hw:1, hw:1,0), there is no
    > > sound, although xmms works with device=hw:1,0. This is very strange indeed.
    > >
    > > Does anybody have any suggestions how this is possible?
    > >
    > > Ferenc

    ------------------------------------------
    Posted to Phorum via PhorumMail