I do not remember more please help
  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member
    Cleaning up...
    * Checking for user pypo
    User already exists.
    Cannot load the ionCube PHP Loader - it was built with configuration API220090626,NTS, whereas running engine is API220100525,NTS
    Zend Guard Loader requires Zend Engine API version 220090626.
    The Zend Engine API version 220100525 which is installed, is newer.
    Contact Zend Technologies at http://www.zend.com/ for a later version of Zend Guard Loader.

    PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/apc.so' - /usr/lib/php5/20100525/apc.so: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/ssh2.so' - /usr/lib/php5/20100525/ssh2.so: cannot open shared object file: No such file or directory in Unknown on line 0
    * Creating INI files
    * Initializing INI files
    * Airtime Version: 2.4.0
    * Storage directory setup
    * Skipping directory already exists: /srv/airtime/stor
    * Giving Apache permission to access /srv/airtime/stor
    * Skipping directory already exists: /srv/airtime/stor/organize
    * Giving Apache permission to access /srv/airtime/stor/organize
    * Checking database for correct encoding
    could not change directory to "/root"
     * Unfortunately your postgresql database has not been created using a UTF-8 encoding.
     * As of Airtime 2.1, installs will fail unless the encoding has been set to UTF-8. Please verify this is the case
     * and try the install again
    There was an error during install. Exit code 1

  • 12 Comments sorted by
  • Vote Up1Vote Down hoerichhoerich
    Posts: 627Member, Airtime Moderator
    ok, seems like Liquidsoap and Silan are not installed.

    I would try to reinstall silan and Liquidsoap. php-apc is optional but recommended

    Install silan:
    sudo apt-get install silan

    Install Sourcefabrics Liquidsoap (actually this should be done after airtime-install, but you could try to install before airtime)
    (bottom of this guide http://en.flossmanuals.net/airtime-en-2-3/automated-installation/ )
    sudo apt-cache show liquidsoap
    sudo apt-get install liquidsoap=1.1.1~wheezy~sfo-1_amd64.deb

    or install manually by downloading here from => http://apt.sourcefabric.org/misc/liquidsoap_1.1.1/
    Official Airtime Forum Manager
    --------------------------
    Most of the time an issue is located between keyboard and chair.
  • Vote Up0Vote Down hoerichhoerich
    Posts: 627Member, Airtime Moderator
    Hi Markus,

    Give us a little more info.

    Which Operation System do you use?
    Which Install way did you use?
    Easy-Install, apt-get (Recommended Automated Install) or tarball (Manual Install)? => http://en.flossmanuals.net/airtime-en-2-3/automated-installation/

    Correct PHP? http://forum.sourcefabric.org/discussion/comment/25828#Comment_25828
    Correct Liquidsoap-Version? http://apt.sourcefabric.org/misc/liquidsoap_1.1.1/

    try to purge airtime & postgresql by typing
    sudo apt-get purge airtime
    sudo apt-get purge postgresql

    and then install php5.4, airtime and probably liquidsoap

    cheers
    Official Airtime Forum Manager
    --------------------------
    Most of the time an issue is located between keyboard and chair.
  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member
    Hello,

    my System is: Debian 6.0 / 64 bit / VPS


    I have the Automated Install performed
    Automated Install
    Automated Install
    Automated Install
    after the manual.
    php and liquid soap I have the correct version (try to purge airtime & postgresql by typing) also made.

    Im unfortunately no expert in linux, but music producer.

    thanks
  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member
    this is the last status:


    PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/apc.so' - /usr/lib/php5/20100525/apc.so: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/ssh2.so' - /usr/lib/php5/20100525/ssh2.so: cannot open shared object file: No such file or directory in Unknown on line 0
    * Creating INI files
    * Initializing INI files
    * Airtime Version: 2.4.0
    * Storage directory setup
    * Skipping directory already exists: /srv/airtime/stor
    * Giving Apache permission to access /srv/airtime/stor
    * Skipping directory already exists: /srv/airtime/stor/organize
    * Giving Apache permission to access /srv/airtime/stor/organize
    * Checking database for correct encoding
    could not change directory to "/root"
     * Unfortunately your postgresql database has not been created using a UTF-8 encoding.
     * As of Airtime 2.1, installs will fail unless the encoding has been set to UTF-8. Please verify this is the case
     * and try the install again
    There was an error during install. Exit code 1


  • Vote Up0Vote Down hoerichhoerich
    Posts: 627Member, Airtime Moderator
    for me it looks like problems with php-version and postgresql's utf-settings

    check php-version by typing "php -v"
    if it's not version 5.4 follow this guide http://www.sysadminslife.com/linux/php-5-4-installation-unter-debian-squeeze-und-upgrade-von-php-5-3/ (you seem native-german)

    for postgresql-error also a reinstall should last http://forum.sourcefabric.org/discussion/15246/airtime-utf-error/p1
    Official Airtime Forum Manager
    --------------------------
    Most of the time an issue is located between keyboard and chair.
  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member
    "php -v" is coming:

    root@vps10149:~# php -v
    Cannot load the ionCube PHP Loader - it was built with configuration API220090626,NTS, whereas running engine is API220100525,NTS
    Zend Guard Loader requires Zend Engine API version 220090626.
    The Zend Engine API version 220100525 which is installed, is newer.
    Contact Zend Technologies at http://www.zend.com/ for a later version of Zend Guard Loader.

    PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/apc.so' - /usr/lib/php5/20100525/apc.so: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/ssh2.so' - /usr/lib/php5/20100525/ssh2.so: cannot open shared object file: No such file or directory in Unknown on line 0
    PHP 5.4.19-1~dotdeb.0 (cli) (built: Aug 24 2013 20:35:58)
    Copyright (c) 1997-2013 The PHP Group
    Zend Engine v2.4.0, Copyright (c) 1998-2013 Zend Technologies

  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member
    as it looks now:

    root@lvps46-163-73-3:~# sudo apt-get install airtime
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Some packages could not be installed. This may mean that you have
    requested an impossible situation or if you are using the unstable
    distribution that some required packages have not yet been created
    or been moved out of Incoming.
    The following information may help to resolve the situation:

    The following packages have unmet dependencies:
     airtime : Depends: liquidsoap (>= 1.1.1~) but it is not going to be installed
               Depends: silan (>= 0.3.1~) but it is not going to be installed
               Recommends: php-apc but it is not going to be installed
    E: Broken packages


    think I give up.
  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member
    Hello hoerich, so that was very helpful. the installation could go on up to Getting started chapter.

    http://flaxtraxx.fm/login = he makes a forwarding to the web

    and here

    http://airtime.flaxtraxx.fm/login = is the white side.

    Now you can somehow get the error out?

    thanks in advance
    Post edited by Markus Maschke at 2013-09-01 17:03:18
  • Vote Up0Vote Down hoerichhoerich
    Posts: 627Member, Airtime Moderator
    check
    /etc/apache2/sites-enabled/airtime.vhost
    for correct subdomain settings
    Official Airtime Forum Manager
    --------------------------
    Most of the time an issue is located between keyboard and chair.
  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member

    Post edited by Markus Maschke at 2013-09-20 16:27:43
  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member
    *** Verifying your system environment, running airtime-check-system ***
    AIRTIME_STATUS_URL             = http://localhost/api/status/format/json/api_key/%%api_key%%
    AIRTIME_SERVER_RESPONDING      = OK
    KERNEL_VERSION                 = 2.6.32-028stab101.1
    MACHINE_ARCHITECTURE           = x86_64
    TOTAL_MEMORY_MBYTES            = 4194304
    TOTAL_SWAP_MBYTES              = UNKNOWN
    AIRTIME_VERSION                = 2.0.3
    OS                             = Debian GNU/Linux 6.0.7 (squeeze) x86_64
    CPU                            = Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
    WEB_SERVER                     = Apache/2.2.16 (Debian)
    PLAYOUT_ENGINE_PROCESS_ID      = 16075
    PLAYOUT_ENGINE_RUNNING_SECONDS = 12
    PLAYOUT_ENGINE_MEM_PERC        = 0.3%
    PLAYOUT_ENGINE_CPU_PERC        = 0.0%
    LIQUIDSOAP_PROCESS_ID          = 16078
    LIQUIDSOAP_RUNNING_SECONDS     = 12
    LIQUIDSOAP_MEM_PERC            = 0.5%
    LIQUIDSOAP_CPU_PERC            = 2.9%
    MEDIA_MONITOR_PROCESS_ID       = 16041
    MEDIA_MONITOR_RUNNING_SECONDS  = 13
    MEDIA_MONITOR_MEM_PERC         = 0.3%
    MEDIA_MONITOR_CPU_PERC         = 1.9%
    RABBITMQ_PROCESS_ID            = 8172
    RABBITMQ_RUNNING_SECONDS       = 10
    RABBITMQ_MEM_PERC              = 0.6%
    RABBITMQ_CPU_PERC              = 0.0%

    -- Your installation of Airtime looks OK!

    ******************************* Install Complete *******************************
    root@vps10149:~/airtime-2.0.3/install_full/debian# cd
    root@vps10149:~# nano /etc/apache2/sites-enabled/airtime.vhost
    root@vps10149:~# airtime-check-system
    AIRTIME_STATUS_URL             = http://localhost/api/status/format/json/api_key/%%api_key%%
    AIRTIME_SERVER_RESPONDING      = OK
    KERNEL_VERSION                 = 2.6.32-028stab101.1
    MACHINE_ARCHITECTURE           = x86_64
    TOTAL_MEMORY_MBYTES            = 4194304
    TOTAL_SWAP_MBYTES              = UNKNOWN
    AIRTIME_VERSION                = 2.0.3
    OS                             = Debian GNU/Linux 6.0.7 (squeeze) x86_64
    CPU                            = Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
    WEB_SERVER                     = Apache/2.2.16 (Debian)
    PLAYOUT_ENGINE_PROCESS_ID      = 16075
    PLAYOUT_ENGINE_RUNNING_SECONDS = 222
    PLAYOUT_ENGINE_MEM_PERC        = 0.3%
    PLAYOUT_ENGINE_CPU_PERC        = 0.0%
    LIQUIDSOAP_PROCESS_ID          = 16078
    LIQUIDSOAP_RUNNING_SECONDS     = 222
    LIQUIDSOAP_MEM_PERC            = 0.6%
    LIQUIDSOAP_CPU_PERC            = 2.9%
    MEDIA_MONITOR_PROCESS_ID       = 16041
    MEDIA_MONITOR_RUNNING_SECONDS  = 223
    MEDIA_MONITOR_MEM_PERC         = 0.3%
    MEDIA_MONITOR_CPU_PERC         = 0.0%
    RABBITMQ_PROCESS_ID            = 8172
    RABBITMQ_RUNNING_SECONDS       = 220
    RABBITMQ_MEM_PERC              = 0.6%
    RABBITMQ_CPU_PERC              = 0.0%

    -- Your installation of Airtime looks OK!

  • Vote Up0Vote Down Markus MaschkeMarkus Maschke
    Posts: 23Member
    root@vps10149:/etc/airtime# airtime-check-system
    AIRTIME_STATUS_URL             = http://airtime.flaxtraxx.fm/api/status/format/json/api_key/%%api_key%%
    AIRTIME_SERVER_RESPONDING      = OK
    KERNEL_VERSION                 = UNKNOWN
    MACHINE_ARCHITECTURE           = UNKNOWN
    TOTAL_MEMORY_MBYTES            = UNKNOWN
    TOTAL_SWAP_MBYTES              = UNKNOWN
    AIRTIME_VERSION                = UNKNOWN
    OS                             = Debian GNU/Linux 6.0.7 (squeeze) x86_64
    CPU                            = Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
    WEB_SERVER                     = A
    PLAYOUT_ENGINE_PROCESS_ID      = FAILED
    PLAYOUT_ENGINE_RUNNING_SECONDS = 0
    PLAYOUT_ENGINE_MEM_PERC        = 0%
    PLAYOUT_ENGINE_CPU_PERC        = 0%
    LIQUIDSOAP_PROCESS_ID          = FAILED
    LIQUIDSOAP_RUNNING_SECONDS     = 0
    LIQUIDSOAP_MEM_PERC            = 0%
    LIQUIDSOAP_CPU_PERC            = 0%
    MEDIA_MONITOR_PROCESS_ID       = FAILED
    MEDIA_MONITOR_RUNNING_SECONDS  = 0
    MEDIA_MONITOR_MEM_PERC         = 0%
    MEDIA_MONITOR_CPU_PERC         = 0%
    RABBITMQ_PROCESS_ID            = FAILED
    RABBITMQ_RUNNING_SECONDS       = 0
    RABBITMQ_MEM_PERC              = 0%
    RABBITMQ_CPU_PERC              = 0%

    -- There appears to be a problem with your Airtime installation.

    -- Please visit http://wiki.sourcefabric.org/x/HABQ

Add a Comment