James Dunn

2.0.3 not recording shows
Point taken. I could probably look into that. However we now currently have the 2Tb hard drive installed and the permissions look fine. The shows are getting recorded but only sometimes copied across to the hard drive. When they are copied, they a…

Comment by James Dunn May 2012 permalink
2.0.3 not recording shows
After testing 2.0.3 for a week we decided to make the final step and swap over the 500Gb hard drive for the 2Tb because we were running out of space. Airtime can playback the files from this drive but when it copies the recorded shows to the drive, …

Comment by James Dunn May 2012 permalink
2.0.3 not recording shows
Does anyone have any idea what this error could be? It hasn't happened again since 1st May but missing 5 shows is pretty crucial! Just wondering if we should go live with this version or maybe it will happen again? See this log: 2012-05-01 19…

Comment by James Dunn May 2012 permalink
Upgrade from 1.8.2 to 2.0.3 stalled
Hi Wade, All I can say is that in the upgrade I performed on our VM it took 36 hours to reorganise the 350Gb of audio files. This may be slower than some machines as the VM has only 900Mb RAM, although most of the 3.2Ghz CPU should be dedicated to …

Comment by James Dunn April 2012 permalink
Upgrade from 1.8.2 to 2.0.3 stalled
Hi Martin and all, I left the VM upgrade running and finally after 36 hours it's completed! The storage directory has been reorganized and I now have the 3 directories 'imported', 'recorded' and 'organize' contain…

Comment by James Dunn April 2012 permalink
Upgrade from 1.8.2 to 2.0.3 stalled
Hi Martin, Yes the CPU is busy, please see the attached file for details of the top command. Python seems to be the main consumer of the CPU and ps ax shows this line: 3003 pts/1 R+ 259:39 python /home/nts-studio/airtime-2.0.3/install_minimal/upg…

Comment by James Dunn April 2012 permalink
Upgrade from 1.8.2 to 2.0.1: filenames not preserved
Hi Ofir, Yes this seems to be working perfectly now. thanks James

Comment by James Dunn March 2012 permalink
Upgrade from 1.8.2 to 2.0.1: filenames not preserved
Great, thanks!

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: filenames not preserved
Unfortunately not. I did a fresh install of 1.8.2 on a test machine (Ubuntu 10.04.4 LTS), copied and pasted your commands and then recorded a 5 min show. After upgrading to 2.0.1, the filename was changed from: record test 1-2012-02-25-13:25:00 to…

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: filenames not preserved
Also, I just tried recording another show on a clean install of 1.8.2 and upgrading to 2.0.1 and the filename was preserved in the database. Then I tried another clean install of 1.8.2, changed the storage directory to a symlink, and made a recordin…

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: filenames not preserved
Hi Ofir, Thanks for your reply. We have airtime 1.8.2 installed on our production machine which records around 8GB of audio files each week. Each file is around 86, 172 or 256mb for every 1, 2 or 3 hour show. This is too much data to store on th…

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: filenames not preserved
I just tried a clean install of 1.8.2 on another test machine and recorded a short 5 minute show called "record test 1". Then upgraded to 2.0.1. The filename is preserved ok. So I assume that upgrading to 2.0.1 should preserve the filename…

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: recording shows failed
Hi James It didn't upload for some reason to begin with but should be attached to the post above now - can you see it? (show-recorder.log.1) thanks James

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: recording shows failed
Ok, the 09:00 GMT and 12:00 GMT shows have been recorded but it missed the 13:00 GMT show. Please see the attached screenshot and logs. Note: the current show is NOT recording. thanks James

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: recording shows failed
Ok so I just checked in on it again this morning and it's recording the 09:00 GMT show. Here's the latest log. I'll report back if it stops recording again. thanks James

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: recording shows failed
Hi Ofir, After upgrading to 2.0.1, it recorded a few shows (about 10) and now I keep getting the error message as shown in show-recorder.log above and no shows are recorded. We have shows that are either 1, 2, or 3 hours in length (which were set i…

Comment by James Dunn February 2012 permalink
Upgrade from 1.8.2 to 2.0.1: recording shows failed
Hi James, here's the config: api_client = "airtime" # where the binary files live bin_dir = '/usr/lib/airtime/show-recorder' # base path to store recordered shows at base_recorded_files = '/var/tmp/airtime/show-reco…

Comment by James Dunn February 2012 permalink
Shows not recorded after upgrade to 1.9.5
Latest log - as you can see the 18:00 show didn't record: $ tail /var/log/airtime/show-recorder/show-recorder.log 2012-01-30 16:00:06,414 INFO - [recorder.py : set_metadata_and_save() : line 140] - time: 14-00-00 2012-01-30 16:00:06,782 DEBUG…

Comment by James Dunn January 2012 permalink
Shows not recorded after upgrade to 1.9.5
Here's the log James

Comment by James Dunn January 2012 permalink
Shows not recorded after upgrade to 1.9.5
Yes, it recorded the file /var/tmp/airtime/show-recorder/2012-01-30-09:00:00.ogg. It will grab the next show, usually after a system reboot or with the command: sudo service airtime-show-recorder restart Or if I cancel a show and enter a new one. …

Comment by James Dunn January 2012 permalink
Shows not recorded after upgrade to 1.9.5
Yes. Vorbis-tools is installed. I have tried recording to both mp3 and ogg but this is not the problem. The problem is that the show recorder daemon does not receive the shows to be recorded from the schedule after upgrading from 1.8.2. It's li…

Comment by James Dunn January 2012 permalink
Shows not recorded after upgrade to 1.9.5
I created a ticket for it here http://dev.sourcefabric.org/browse/CC-3286

Comment by James Dunn January 2012 permalink
Shows not recorded after upgrade to 1.9.5
Hi Martin, Thanks for you reply. We still can't get the upgraded version of airtime to record shows. I have upgraded to 2.0.0 and the schedule is there in the calendar view, but the shows are not getting recorded. Here is the tail of the show-…

Comment by James Dunn January 2012 permalink
Streaming bitrates and formats - what are you using at your station?
192kbit for recording and streaming

Comment by James Dunn January 2012 permalink
Scripts and current song.
Point number 2: I have in my ls_script.liq: archive = (playlist(mode='random', "/media/usb/airtime/stor")) backup = (playlist(mode='random', "/media/usb/safe")) default = mksafe(fallback(track_sensitive=fals…

Comment by James Dunn January 2012 permalink
The moment you've all been waiting for... Airtime 2.0 is here.
I have a number of web ui bugs as detailed in the bug report here: http://dev.sourcefabric.org/browse/CC-3283 James

Comment by James Dunn January 2012 permalink
Shows not recorded after upgrade to 1.9.5
Ok I fixed this by adding include /etc/monit/conf.d/* to /etc/monit/monitrc as detailed on the wiki page for the manual install of 1.9.x. It doesn't mention this as being necessary in the upgrade process for 1.9.x or 2.0 though - perhaps the w…

Comment by James Dunn January 2012 permalink
Shows not recorded after upgrade to 1.9.5
Regarding the error message: Starting daemon monitor: empty config, please edit /etc/monit/monitrc I then checked cat /etc/monit/monitrc and it reveals every line to be commented out with # Do I need to edit this file? thanks James

Comment by James Dunn January 2012 permalink
Shows not recorded after upgrade to 1.9.5
nts-studio@nts-studio2:~$ sudo rm -rf /etc/monit/conf.d nts-studio@nts-studio2:~$ cd airtime-2.0.0/install_minimal/ nts-studio@nts-studio2:~/airtime-2.0.0/install_minimal$ sudo ./airtime-install -r * Checking for existing Airtime installation... **…

Comment by James Dunn January 2012 permalink
The moment you've all been waiting for... Airtime 2.0 is here.
I have just installed 2.0 on our non-functioning 1.9.5 machine and still it doesn't work - please see my thread here: http://forum.sourcefabric.org/discussion/13682/shows-not-recorded-after-upgrade-to-1.9.5 James

Comment by James Dunn January 2012 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Follow James Dunn

About

Username: James Dunn
Joined: May 2011
Visits: 0
Last Active: July 2018
Roles: Member
Posts: 226

Friends

My Badges

Total Points: 80

James Dunn

Howdy, Stranger!

About

Friends

My Badges

Top Posters