Discussions
Activity
Sign In
How it works
Voisses Tech
Activity
Discussions
65
Comments
1358
airtime-import not installed
did you actually run this command sudo airtime-import --watch-add /some/folder Pay little attention to the status check all it does is that the script to confirm that all of Airtime's dependencies are installed and running correctly. It doe…
Comment by
Voisses Tech
January 2017
permalink
Someone using Airtime 2.5.2.1 in 2017?
https://sourcefabric.booktype.pro/airtime-25-for-broadcasters/upgrading/
Comment by
Voisses Tech
January 2017
permalink
airtime-import not installed
try this http://sourcefabric.booktype.pro/airtime-25-for-broadcasters/troubleshooting/ if not sudo dpkg-reconfigure airtimeif not re install sudo apt-get purge airtime && sudo apt-get autoremove && sudo apt-get install airtime pay …
Comment by
Voisses Tech
January 2017
permalink
Several hacks/mods for live metadata, auto-dj, force-deletion, charting, etc, against 2.5.1-ga
not my work. Some things I do not like for example the remove of the transitions it makes airtime seems rough at chage over
Comment by
Voisses Tech
January 2017
permalink
Hiring for Airtime modifications
What do you need ?
Comment by
Voisses Tech
January 2017
permalink
airtime-import not installed
right had corner where the tick is shows the version number try something this at the command line sudo airtime-import --watch-add /var/www/radio/music/selection/playlist001/ I however feel you are using debian and there were some problem with me…
Comment by
Voisses Tech
January 2017
permalink
You have got to be kidding me...
Screen shots notes notice I have modified my reference to ven be able to chage the device card nummber and incude a number of features. tunein ,silence detection , TOH,etc. Yo can listen to voisses (caribbean experience) on tunein and see how these …
Comment by
Voisses Tech
January 2017
permalink
You have got to be kidding me...
notes on the auto schedule line 78 ,the field created was missing $columns = "(starts, ends, show_id, record, rebroadcast, instance_id, file_id, time_filled,created, last_scheduled, modified_instance)"; to run change the extension to p…
Comment by
Voisses Tech
January 2017
permalink
You have got to be kidding me...
Nope. You fall in the same trap as others.Airtime is an open source.just like rivendell,you add what you want.Even Sams used to be like that and Mixxx is like that . Where you fall in the trap is that a lot of people become critics and a lot who th…
Comment by
Voisses Tech
January 2017
permalink
airtime-import not installed
always quote your airtime version it helps
Comment by
Voisses Tech
January 2017
permalink
AIRTIME NOT PLAYING - ICECAST_PROCESS_ID : FAILED
Gosh you need an upgrade bad! bad!. Airtime last stable is version 2.5.1.6 https://sourcefabric.booktype.pro/airtime-25-for-broadcasters/automated-installation/ There is also a version 2.5.2.1 (you need a bug spray) https://forum.sourcefabric.org…
Comment by
Voisses Tech
January 2017
permalink
Airtime 2.5.1 | Getting information from the server...
what version of airtime are you using?
Comment by
Voisses Tech
December 2016
permalink
Airtime Development Status // Summer 2016
So great to see a step forward but I have concerns WhmcsLogin - why is this in the new program and there are no notes that it was added in.In fact I would have to say a change log would be appropriate .The fact that is uses curl in the controller i…
Comment by
Voisses Tech
December 2016
permalink
How to fix when a new show begins, the current song playing gets cut
why not just extends your shows by one minute or few.Aitrime is time specific and require some planning,for what i tested the onlly change is allowing you to extend the show. Pay attention to the overflows in your calendar and make the necessary ad…
Comment by
Voisses Tech
December 2016
permalink
Airtime 2.5.1 | Getting information from the server...
just go under stream settings and chane the type from ogg to mp3. hope that work
Comment by
Voisses Tech
December 2016
permalink
Live DJ override not cutting off at end of show
just make the connections fallible then strip the silence This should do it just tweak the numbers and place at the numbers given #@ line250 dj_live =mksafe(dj_live) dj_live=strip_blank(max_blank=30.,threshold=-45.,dj_live) #@ line272 master_d…
Comment by
Voisses Tech
November 2016
permalink
Liquid Soap Crossfade Transitions on Playlists
radio= crossfade_airtime(radio) or use one from the library radio = crossfade(start_next=1.,fade_out=1.,fade_in=1.,radio) or create your own http://savonet.sourceforge.net/doc-svn/cookbook.html
Comment by
Voisses Tech
November 2016
permalink
Liquidsoap change metadata on live input only
"The variable live defined here is not used anywhere' That is because the live input is not active." This is your clue. you cannot use a varible before defining it. basic programming so # A live source like a dj live = input.harbor…
Comment by
Voisses Tech
November 2016
permalink
Need folders view option in library
I could send you a little script i used to organized my library according to album and it runs via a cron(liquidsoap) that will update the album every minute. okay I clean it up over the weekend and submit it as an hack
Comment by
Voisses Tech
November 2016
permalink
How to add background music to my voice narration with Airtime
get yourself a good old cheap mixer and just use either the line in the Aux /Fx,or 2nd Track for your music and then the Mic/Line-in for your voice then put your butt in the output of the mixer no software configuration needed.
Comment by
Voisses Tech
September 2016
permalink
How to add background music to my voice narration with Airtime
get yourself a good old cheap mixer and just use either the line in the Aux /Fx,or 2nd Track for your music and then the Mic/Line-in for your voice. no software configuration needed
Comment by
Voisses Tech
September 2016
permalink
Airtime Development Status // Summer 2016
@Roger Wlco I have fun reading any of your post .Used to say "What are you talking about will!" but if I could create a next section and name it Comedy and Clicks "I definitely would put most of your post Lol. @Younes Duret They…
Comment by
Voisses Tech
September 2016
permalink
Stories get cut off
https://forum.sourcefabric.org/discussion/17273/bugfix-silan-packages-for-ubuntu-14-04-lts-trusty-now-available/p1
Comment by
Voisses Tech
September 2016
permalink
Howto: Install Airtime on a Raspberry Pi 3!
just install ubuntu mate it install the server version and trust me you can just follow the auto install. I have this for more than a year now and no problems on RPI2 over he last 6 months I have been running on RPI 3 and its smooth just make sure…
Comment by
Voisses Tech
September 2016
permalink
Airtime removed a scheduled item from the cache dir, then played the previous file again
try make sure you have Airtime version 2.5.1.6 your cache directory is found by this ls -l /var/tmp/airtime/pypo/cache/scheduler/ if nothing is schedule you should see this ls -l /var/tmp/airtime/pypo/cache/scheduler/ total 0 if you see something…
Comment by
Voisses Tech
September 2016
permalink
Overlapping Audio Files on Scheduled Shows — Need help!
try make sure you have Airtime version 2.5.1.6 your cache directory is found by this ls -l /var/tmp/airtime/pypo/cache/scheduler/ if nothing is schedule you should see this ls -l /var/tmp/airtime/pypo/cache/scheduler/ total 0 if you see something…
Comment by
Voisses Tech
September 2016
permalink
Could not select mounted google drive as source of airtime
You May want to read this http://sourcefabric.booktype.pro/airtime-25-for-broadcasters/media-folders/ paragraph "If you specify a network drive as a media folder and that network becomes disconnected for any reason, Airtime's media moni…
Comment by
Voisses Tech
September 2016
permalink
Mix input streams instead of switching
http://stackoverflow.com/questions/26215894/mixing-two-icecast-stream-with-liquidsoap-and-stream-it-to-icecast-server would be best done this way since add a source to another will replace it so smooth_add is the function to use source_1 = input.ha…
Comment by
Voisses Tech
September 2016
permalink
Mix input streams instead of switching
I think this would be achieve with hardware. use like aux in no withstanding #I use this to get a nice duck effect in my script radio = smooth_add(normal=radio,special=line_in) #you could do this with Airtime #At about line 284 s = smooth_add(no…
Comment by
Voisses Tech
September 2016
permalink
Liquidsoap & external encoder help.
Raspbian use liquidsoap v1.01 flac do not work good on this version you best re-compile liquidsoap to 1.1 or use shine instead or get Raspberry pi 2 and install ubuntu14.04 and you are good to go
Comment by
Voisses Tech
August 2016
permalink
More Comments
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Sign In
Apply for Membership
Stop following
About
Username
Voisses Tech
Joined
January 2013
Visits
0
Last Active
July 2018
Roles
Member
Posts
1,423
Friends
Following 1 person
Followed by 7 people
My Badges
Total Points: 80
Top Posters
Albert FR
1978
Martin Konecny
1860
Andrey Podshivalov
1526
Voisses Tech
1423
John Chewter
899
Daniel James
844
Roger Wilco
784
hoerich
627
Paul Baranowski
389
Cliff Wang
339