[SOLVED] apt-get update && apt-get dist-upgrade doesn't work
  • Vote Up0Vote Down MaximeMaxime
    Posts: 7Member
    Hello everyone!

    I've been using Airtime for some months now, but I'm currently encountering a strange problem : when I try to update Airtime thanks to apt-get update + apt-get dist-upgrade (+ sudo, ofc) Airtime doesn't update. The problem is I'm using 2.5.0, so there should be an update...

    I checked and the sourcefabric repo seems alright ('deb http://apt.sourcefabric.org/ precise main'
     is in /etc/apt/sources.list.d/sourcefabric.list). Here are the lines concerning Sourcefabric when 'apt-get update' :

    Hit http://apt.sourcefabric.org precise/main i386 Packages
    Ign http://apt.sourcefabric.org precise/main TranslationIndex
    Ign http://apt.sourcefabric.org precise/main Translation-en_US
    Ign http://apt.sourcefabric.org precise/main Translation-en

    So, am I missing something?

    Thank you very much for your help.

    Maxime.
    Post edited by Maxime at 2014-05-13 16:41:04
  • 11 Comments sorted by
  • Vote Up0Vote Down Steven McPhillipsSteven McPhillips
    Posts: 29Member
    Hi Maxine,

    What happens if you follow `apt-get update` with `apt-get --just-print upgrade`, instead of `apt-get dist-upgrade`? 

    I'd be interested in the output of that... Note the --just-print bit stops the upgrade from actually happening, instead reporting what would happen if that flag wasn't provided.

    For testing, I'd recommend running each command separately (i.e. don't join with `&&`. Either hit [enter] after each job, or separate with a semicolon `;`)


    Post edited by Steven McPhillips at 2014-04-16 21:30:50
  • Vote Up0Vote Down MaximeMaxime
    Posts: 7Member
    Hi Steven,

    thank you for your answer!

    In fact, I never use the '&&', I always run the commands separately, in order to check every step. Here is the output of  'sudo apt-get --just-print upgrade' run just after 'sudo apt-get update' :

    Reading package lists... Done
    Building dependency tree      
    Reading state information... Done
    The following packages have been kept back:
      sendmail sendmail-base sendmail-bin sendmail-cf
    0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.

    Maxime.
    Post edited by Maxime at 2014-04-17 13:44:41
  • Vote Up0Vote Down Steven McPhillipsSteven McPhillips
    Posts: 29Member
    Hi Maxine,

    Thanks for the extra information. It's interesting that your apt-get update command isn't showing an updated Airtime package - if you look at http://apt.sourcefabric.org/dists/precise/main/binary-i386/Packages, you can see it is currently providing version 2.5.1-1.

    Based on the output of the "--just-print" upgrade command, your system seems to think it has all available updates applied (sendmail notwithstanding). Can I get you to confirm the current version of Airtime installed: dpkg -l airtime should do the trick. If the last line of the output starts with 'ii', the listed version - which should be 2.5.1-1 - is installed correctly. (edit: the dpkg command won't require sudo)
    Post edited by Steven McPhillips at 2014-04-19 22:36:46
  • Vote Up0Vote Down MaximeMaxime
    Posts: 7Member
    Hi Steven,

    here's the output of dpkg -l airtime :

    ii  airtime             2.5.1-1             open broadcast software for scheduling and station man...

    The strange part is that the command airtime-check-system returns a different version :

    AIRTIME_STATUS_URL             = http://XXXX:80/api/status/format/json/api_key/%%api_key%%
    AIRTIME_SERVER_RESPONDING      = OK
    KERNEL_VERSION                 = 3.5.0-48-generic
    MACHINE_ARCHITECTURE           = x86_64
    TOTAL_MEMORY_MBYTES            = 4049504
    TOTAL_SWAP_MBYTES              = 3156768
    AIRTIME_VERSION                = 2.5.0
    OS                             = Ubuntu 12.04.4 LTS x86_64
    CPU                            = QEMU Virtual CPU version 0.12.3
    WEB_SERVER                     = Apache/2.2.22 (Ubuntu)
    PLAYOUT_ENGINE_PROCESS_ID      = 1444
    PLAYOUT_ENGINE_RUNNING_SECONDS = 330247
    PLAYOUT_ENGINE_MEM_PERC        = 0.4%
    PLAYOUT_ENGINE_CPU_PERC        = 0.0%
    LIQUIDSOAP_PROCESS_ID          = 2054
    LIQUIDSOAP_RUNNING_SECONDS     = 330211
    LIQUIDSOAP_MEM_PERC            = 0.9%
    LIQUIDSOAP_CPU_PERC            = 8.9%
    MEDIA_MONITOR_PROCESS_ID       = 1439
    MEDIA_MONITOR_RUNNING_SECONDS  = 330247
    MEDIA_MONITOR_MEM_PERC         = 0.2%
    MEDIA_MONITOR_CPU_PERC         = 0.0%
    -- Your installation of Airtime looks OK!

    (I removed the IP adress for security reasons)

    So, do I have two different versions installed? :s

    Maxime.
    Post edited by Maxime at 2014-04-20 10:36:12
  • Vote Up0Vote Down Steven McPhillipsSteven McPhillips
    Posts: 29Member
    Hi Maxine,

    OK, I can confirm you've got the latest version. Although airtime-check-system is reporting 2.5.0, dpkg does not lie :)

    Hunting around a bit, I've noticed the version details as available to airtime-check-system
    differ from what dpkg sees. I've notified the package maintainer of this, and we'll see what happens.
    Post edited by Steven McPhillips at 2014-04-20 21:04:41
  • Vote Up0Vote Down MaximeMaxime
    Posts: 7Member
    Hi Steven,

    Ok! The Airtime web interface tells me that I'm on 2.5.0 and that a new version of Airtime is available. Is it just the same problem?

    Thank you very much for your help,

    Maxime.
  • Vote Up0Vote Down Steven McPhillipsSteven McPhillips
    Posts: 29Member
    Hmm, I've had a bit of a poke around the deb source package, and it seems your install should at least be reporting 2.5.1. It might be worthwhile running apt-get install --reinstall airtime to re-apply the airtime package, just in case something went wrong in the original update.

    I would make a backup of your airtime (and apache) config beforehand, especially if you've modified them.

    I'm still waiting to hear back from the package maintainer, so an alternative would be to hold on for their thoughts... when I have more information, I'll post it here.
  • Vote Up0Vote Down Honza VamberskýHonza Vamberský
    Posts: 1Member
    Hi,
    I have problem with install airtime 2.5.1 to Linux Ubuntu 14.04 LTS.
    ----------------------------------------------------------------------------
    W: Chyba GPG: http://backports.debian.org squeeze-backports InRelease: Následující podpisy nemohly být ověřeny, protože není dostupný veřejný klíč: NO_PUBKEY 8B48AD6246925553
    W: Selhalo stažení http://apt.sourcefabric.org/dists/trusty/main/binary-i386/Packages  404  Not Found [IP: 144.76.185.238 80]

    E: Některé indexové soubory se nepodařilo stáhnout. Jsou ignorovány, nebo jsou použity starší verze.
    honza@honza-GA-MA74GM-S2:~$ 
    ---------------------------------------------------------------------------
    :-(
    Help me, please.
    Thanx
    Honza
  • Vote Up0Vote Down Voisses TechVoisses Tech
    Posts: 1,423Member
    There is no Available distribution package for Raring and Trusty ( you will get a 404 error)

    These are the only Available Packages

    Ubuntu
    lucid                
     precise              
     quantal                 
     saucy 

      Debian               
     squeeze              
     wheezy    

    Good Luck
    VOISSES
    Post edited by Voisses Tech at 2014-04-26 13:29:04
    Anyone reading this a find it funny about my grammar , I make no apology ,Go get a translator.
    "The Problem with education today is that it takes a university degree to switch on a light bulb"
    "You learn from your mistakes but wise people learn from others mistakes avoid Making mistakes there is not sufficient rooms to make them"
    "Innuendo","If's","Assumptions" and "Fear" are for politician.Who,What,where,When and How are for those seeking knowledge and care about Humanity.
    "I might be in Mud but that does not Make me a Wild Hog(pig)"
    “Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius — and a lot of courage to move in the opposite direction.”
    "The only thing that remains constant is change itself"
    May the force be with you,until our path or destiny bring us in tandem.
  • Vote Up0Vote Down MaximeMaxime
    Posts: 7Member
    Hi folks!

    Just to tell you that I solved my problem thanks to apt-get install --reinstall airtime !

    Make sure that you have saved your config files before, and specially icecast files, since they will be cleared.

    Also, you will need to update airtime.ini (db password).

    Thanks a lot for your help Steven !

    Maxime.
    Post edited by Maxime at 2014-05-13 18:09:28
  • Vote Up0Vote Down Steven McPhillipsSteven McPhillips
    Posts: 29Member
    Glad to hear Maxime - thanks for taking the time to report back and mark the discussion as solved. I'm sure this will prove useful to other Airtime users in the future!
Add a Comment