- Default Interface Timezone settings still ignored

Kahuitel said:

Hi ! Will it include the following feature?

"Create a show with dynamic smart block and then repeat it (no end) so Airtime would generate content meeting block criteria each time show is played?"

http://forum.sourcefabric.org/discussion/14715/repeating-shows-that-contain-dynamic-smart-blocks

No, this feature is planned for the 2.4 release in march.

Denise Rigato said:

Reply to @Roger+Wilco

> - Default Interface Timezone settings still ignored

Click on your username in the top right corner.

What is the timezone setting there? The UI should reflect this timezone.

Can you please confirm if this is the case?

The Default Interface Timezone on Preferences page is used to set the timezone setting when new users are created.

Confirmed! Wasn't expecting the user-level time settings. Thank you! Maybe I missed it (or it didn't take?) but think about adding a default timezone selection in the initial settings configuration.

Roger Wilco said:

- Initial Support Feedback prompt still going to "http://showbuilder" after send without the server IP or even a localhost call in the URL

I don't recall having this problem with this build:

Hi SF!

I was running airtime 2.2.1 under Ubuntu 12.04 (actually its KXStudio 12.04.1) installed from the SF PPA but I was unable to get 'Add Media' to work from within the Airtime web interface running under Firefox (17.0.1) - I just get the error

"This file appears to be corrupted and will not be added to media library."

with every MP3 and WAV file I have tried and I know they are not corrupt as they play fine. Some may have missing or incorrect metadata but could that cause this error? I updated with the 2.3 rc2 package above but I still have the same problem whilst "sudo airtime-check-system" says everything is OK.

I have been successful in adding MP3s and WAVs to airplay using the airtime-import command as root but doing it this way (maybe via SSH) really isn't going to be a practical solution for our DJs and hosts who are mostly far from being considered remotely techie so we really need the web interface to work for adding media.

Also, I have seen recommendations for what apps to use to correct or add MP3 metadata but I have not found a spec or example of what Airtime requires to be happy and what is the command to show the existing character encoding used in a MP3 ID3 tag?

Thanks for your help!

it is not advisable
but wait only few days
normally 2.3 will be available the 12th February

Polish localization for Airtime is 100% completed :)

Cheers ! :)

Hi,

On the manual for 2.3 for smartphone journalism you have forgot BroadcastMyself for Android ;-) a great app

https://play.google.com/store/apps/details?id=sa.broadcastmyself

BroadcastMySelf is an Android client for Icecast/Shoutcast Server.

If you like this app, please rate it and write nice comments

Features:

* Stream live audio directly from your microphone and your tracks
* record and save in mp3 format
* Mixing console, two channels (mic, tracks)
* VU and Peak Meters.
* Multitouch sliding volume control (fader).
* Mic and Track gain settings.
* Broadcast to icecast/shoutcast server.

Roger Wilco said:

Someone oughta post a Liquidsoap 1.1.0 RC binary for Precise (LTS)

Chop chop! :)

We don't have time to do it for RC's, but we do have instructions for those who'd like to jump ahead :)