AirTime Installation Issue - apt-get - Airtime Support Discussions on Sourcefabric Forum

Dustin Page · Post edited by Dustin Page at 2012-08-29 20:42:47

I'm unable to install AirTime on my server. I've attached a full console log. I'd appreciate any assistance on this matter.

mckendree@radio:~$ sudo apt-get install airtime
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
erlang-asn1 erlang-corba erlang-docbuilder erlang-edoc erlang-erl-docgen
erlang-eunit erlang-ic erlang-inviso erlang-nox erlang-odbc erlang-os-mon
erlang-parsetools erlang-percept erlang-snmp erlang-ssh erlang-xmerl
liquidsoap postgresql rabbitmq-server
Suggested packages:
airtime-audio-samples erlang erlang-manpages erlang-doc xsltproc fop
erlang-ic-java festival mplayer liguidsoap liquidsoap-plugin-mad
liquidsoap-plugin-lame liquidsoap-plugin-taglib liquidsoap-plugin-vorbis
liquidsoap-plugin-flac liquidsoap-plugin-voaacenc liquidsoap-plugin-icecast
liquidsoap-plugin-faad liquidsoap-plugin-pulseaudio
liquidsoap-plugin-samplerate liquidsoap-plugin-xmlplaylist
The following NEW packages will be installed:
airtime erlang-asn1 erlang-corba erlang-docbuilder erlang-edoc
erlang-erl-docgen erlang-eunit erlang-ic erlang-inviso erlang-nox
erlang-odbc erlang-os-mon erlang-parsetools erlang-percept erlang-snmp
erlang-ssh erlang-xmerl liquidsoap postgresql rabbitmq-server
0 upgraded, 20 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/21.6 MB of archives.
After this operation, 58.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? Y
Preconfiguring packages ...
Selecting previously unselected package postgresql.
(Reading database ... 251706 files and directories currently installed.)
Unpacking postgresql (from .../postgresql_9.1+129_all.deb) ...
Selecting previously unselected package liquidsoap.
Unpacking liquidsoap (from .../liquidsoap_1.0.1~precise~sfo-1_i386.deb) ...
Selecting previously unselected package erlang-asn1.
Unpacking erlang-asn1 (from .../erlang-asn1_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-corba.
Unpacking erlang-corba (from .../erlang-corba_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-xmerl.
Unpacking erlang-xmerl (from .../erlang-xmerl_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-edoc.
Unpacking erlang-edoc (from .../erlang-edoc_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-docbuilder.
Unpacking erlang-docbuilder (from .../erlang-docbuilder_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-erl-docgen.
Unpacking erlang-erl-docgen (from .../erlang-erl-docgen_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-eunit.
Unpacking erlang-eunit (from .../erlang-eunit_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-ic.
Unpacking erlang-ic (from .../erlang-ic_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-inviso.
Unpacking erlang-inviso (from .../erlang-inviso_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-odbc.
Unpacking erlang-odbc (from .../erlang-odbc_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-snmp.
Unpacking erlang-snmp (from .../erlang-snmp_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-os-mon.
Unpacking erlang-os-mon (from .../erlang-os-mon_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-parsetools.
Unpacking erlang-parsetools (from .../erlang-parsetools_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-percept.
Unpacking erlang-percept (from .../erlang-percept_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-ssh.
Unpacking erlang-ssh (from .../erlang-ssh_1%3a14.b.4-dfsg-1ubuntu1_i386.deb) ...
Selecting previously unselected package erlang-nox.
Unpacking erlang-nox (from .../erlang-nox_1%3a14.b.4-dfsg-1ubuntu1_all.deb) ...
Selecting previously unselected package rabbitmq-server.
Unpacking rabbitmq-server (from .../rabbitmq-server_2.7.1-0ubuntu4_all.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
ureadahead will be reprofiled on next reboot
Setting up postgresql (9.1+129) ...
Selecting previously unselected package airtime.
(Reading database ... 252941 files and directories currently installed.)
Unpacking airtime (from .../airtime_2.1.3-1_all.deb) ...
Processing triggers for desktop-file-utils ...
Processing triggers for bamfdaemon ...
Rebuilding /usr/share/applications/bamf.index...
Processing triggers for gnome-menus ...
Processing triggers for man-db ...
Setting up liquidsoap (1.0.1~precise~sfo-1) ...
Starting channels: OK
Setting up erlang-asn1 (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-corba (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-xmerl (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-edoc (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-docbuilder (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-erl-docgen (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-eunit (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-ic (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-inviso (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-odbc (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-snmp (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-os-mon (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-parsetools (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-percept (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-ssh (1:14.b.4-dfsg-1ubuntu1) ...
Setting up erlang-nox (1:14.b.4-dfsg-1ubuntu1) ...
Setting up rabbitmq-server (2.7.1-0ubuntu4) ...
Starting rabbitmq-server: SUCCESS
rabbitmq-server.
Setting up airtime (2.1.3-1) ...
Site airtime-vhost already disabled
Setting up apache2...
Enabling site airtime-vhost.
To activate the new configuration, you need to run:
service apache2 reload
Module rewrite already enabled
Site default already disabled
Configuring php5...
Setting up icecast2...
Restarting icecast2: Starting icecast2
Detaching from the console
icecast2.
Setting up monit configuration...
/etc/init.d/monit: 39: [: restart: unexpected operator
/etc/init.d/monit: 39: [: stop: unexpected operator
* Stopping daemon monitor monit [ OK ]
/etc/init.d/monit: 39: [: start: unexpected operator
* Starting daemon monitor monit [ OK ]
* Restarting web server apache2 [Wed Aug 29 19:04:59 2012] [warn] NameVirtualHost *:8080 has no VirtualHosts
... waiting [Wed Aug 29 19:05:00 2012] [warn] NameVirtualHost *:8080 has no VirtualHosts
[ OK ]
Creating symlink for Liquidsoap...

Debian package of Airtime detected...

* Making sure /etc/default/locale is set properly
LANG="en_US.UTF-8"
* None found.
* Temporarily stopping any previous running services

******************************** Install Begin *********************************
Ensuring python-virtualenv version > 1.4.8...Success!

*** Creating Virtualenv for Airtime ***
Already using interpreter /usr/bin/python
The --no-site-packages flag is deprecated; it is now the default behavior.
New python executable in /usr/lib/airtime/airtime_virtualenv/bin/python
Installing distribute.............................................................................................................................................................................................done.
Installing pip...............done.

*** Installing Python Libraries ***
Unpacking /var/lib/airtime/tmp/python_apps/python-virtualenv/airtime_virtual_env.pybundle
Downloading/unpacking configobj
Running setup.py egg_info for package configobj

Downloading/unpacking pytz
Running setup.py egg_info for package pytz

warning: no files found matching '*.pot' under directory 'pytz'
warning: no previously-included files found matching 'test_zdump.py'
Downloading/unpacking mutagen
Running setup.py egg_info for package mutagen

Downloading/unpacking kombu
Running setup.py egg_info for package kombu

Downloading/unpacking poster
Running setup.py egg_info for package poster

Downloading/unpacking amqplib
Running setup.py egg_info for package amqplib

Downloading/unpacking anyjson
Running setup.py egg_info for package anyjson

Downloading/unpacking pyinotify
Running setup.py egg_info for package pyinotify

Installing collected packages: configobj, pytz, mutagen, kombu, poster, amqplib, anyjson, pyinotify
Running setup.py install for configobj

Running setup.py install for pytz

warning: no files found matching '*.pot' under directory 'pytz'
warning: no previously-included files found matching 'test_zdump.py'
Running setup.py install for mutagen
changing mode of build/scripts-2.7/mid3iconv from 644 to 755
changing mode of build/scripts-2.7/mutagen-inspect from 644 to 755
changing mode of build/scripts-2.7/mutagen-pony from 644 to 755
changing mode of build/scripts-2.7/mid3v2 from 644 to 755
changing mode of build/scripts-2.7/moggsplit from 644 to 755

changing mode of /usr/lib/airtime/airtime_virtualenv/bin/mid3iconv to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/mutagen-inspect to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/mutagen-pony to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/mid3v2 to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/moggsplit to 755
Running setup.py install for kombu

Running setup.py install for poster

Running setup.py install for amqplib

Running setup.py install for anyjson

Running setup.py install for pyinotify

Successfully installed configobj pytz mutagen kombu poster amqplib anyjson pyinotify
Cleaning up...

*** Patching Python Libraries ***
* Patching virtualenv libraries in /usr/lib/airtime/airtime_virtualenv/lib/python2.7

---Applying Patches for mutagen---
patching file site-packages/mutagen/mp3.py
Hunk #1 succeeded at 205 (offset -4 lines).
patching file site-packages/mutagen/mp3.py
Hunk #2 succeeded at 169 (offset -4 lines).
* Checking for user pypo
* Creating user pypo
* Creating INI files
* Initializing INI files
* Airtime Version: 2.1.3
* Storage directory setup
* Skipping directory already exists: /srv/airtime/stor
* Giving Apache permission to access /srv/airtime/stor
* Skipping directory already exists: /srv/airtime/stor/organize
* Giving Apache permission to access /srv/airtime/stor/organize
* Checking database for correct encoding
* Unfortunately your postgresql database has not been created using a UTF-8 encoding.
* As of Airtime 2.1, installs will fail unless the encoding has been set to UTF-8. Please verify this is the case
* and try the install again
There was an error during install. Exit code 1
dpkg: error processing airtime (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
airtime
E: Sub-process /usr/bin/dpkg returned an error code (1)

Dustin Page · Post edited by Dustin Page at 2012-09-01 00:24:41

AirTime is now installed and functioning properly.

In case anyone is having issues with removing postgresql, I found this guide from stackoverflow:

http://stackoverflow.com/questions/2748607/how-to-thoroughly-purge-and-reinstall-postgresql-on-ubuntu

Thanks again for all of your help!

Albert FR

Unfortunately your postgresql database has not been created using a UTF-8 encoding.

* As of Airtime 2.1, installs will fail unless the encoding has been set to UTF-8. Please verify this is the case

* and try the install again

Dustin Page

I followed similar instructions such as adding a new repo like on this other post: http://forum.sourcefabric.org/discussion/comment/19103#Comment_19103

I am still receiving errors on AirTime even after running apt-get purge on postgre, airtime, and others.

Here's where I am at right now.

---Applying Patches for mutagen---

patching file site-packages/mutagen/mp3.py

Hunk #1 succeeded at 205 (offset -4 lines).

patching file site-packages/mutagen/mp3.py

Hunk #2 succeeded at 169 (offset -4 lines).

* Checking for user pypo

User already exists.

* Creating INI files

* Initializing INI files

* Airtime Version: 2.1.3

* Storage directory setup

* Skipping directory already exists: /srv/airtime/stor

* Giving Apache permission to access /srv/airtime/stor

* Skipping directory already exists: /srv/airtime/stor/organize

* Giving Apache permission to access /srv/airtime/stor/organize

* Checking database for correct encoding

psql: could not connect to server: No such file or directory

Is the server running locally and accepting

connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"?

* Unfortunately your postgresql database has not been created using a UTF-8 encoding.

* As of Airtime 2.1, installs will fail unless the encoding has been set to UTF-8. Please verify this is the case

* and try the install again

There was an error during install. Exit code 1

I would appreciate any help on this matter. Thanks again!

Albert FR

look this : http://forum.sourcefabric.org/discussion/comment/18952#Comment_18952

Dustin Page

I just ran the commands listed in the forum.

export LANGUAGE=en_US.UTF-8 

export LANG=en_US.UTF-8 

export LC_ALL=en_US.UTF-8 

locale-gen en_US.UTF-8 

dpkg-reconfigure locales

I'm still having issues with installation.

---Applying Patches for mutagen---

patching file site-packages/mutagen/mp3.py

Hunk #1 succeeded at 205 (offset -4 lines).

patching file site-packages/mutagen/mp3.py

Hunk #2 succeeded at 169 (offset -4 lines).

* Checking for user pypo

User already exists.

* Creating INI files

* Initializing INI files

* Airtime Version: 2.1.3

* Storage directory setup

* Skipping directory already exists: /srv/airtime/stor

* Giving Apache permission to access /srv/airtime/stor

* Skipping directory already exists: /srv/airtime/stor/organize

* Giving Apache permission to access /srv/airtime/stor/organize

* Checking database for correct encoding

* Unfortunately your postgresql database has not been created using a UTF-8 encoding.

* As of Airtime 2.1, installs will fail unless the encoding has been set to UTF-8. Please verify this is the case

* and try the install again

There was an error during install. Exit code 1

dpkg: error processing airtime (--configure):

subprocess installed post-installation script returned error exit status 1

No apport report written because MaxReports is reached already

Setting up odbcinst (2.2.14p2-5ubuntu3) ...

Processing triggers for libc-bin ...

ldconfig deferred processing now taking place

Errors were encountered while processing:

airtime

E: Sub-process /usr/bin/dpkg returned an error code (1)

Martin Konecny · Post edited by Martin Konecny at 2012-08-31 11:21:36

Hi Dustin,

The way we checking database encoding is simply by using

sudo -u postgres psql -c "SHOW SERVER_ENCODING"

For example, on my system, running this command gives me the following:

martin@Thinkpad-T410:~/workspace/airtime$ sudo -u postgres psql -c "SHOW SERVER_ENCODING"
[sudo] password for martin:
server_encoding
-----------------
UTF8
(1 row)

Please play around with postgresql until you get UTF8 as the output of this command.

This series of command should work:

sudo -s
apt-get purge postgresql
export LC_ALL=en_US.UTF-8
apt-get install postgresql

Now run the SERVER_ENCODING command from above and tell us the output

Dustin Page · Post edited by Dustin Page at 2012-08-31 14:04:52

Martin, I followed the instructions above and here's the output I receive from SERVER_ENCODING.

mckendree@radio:~$ sudo -u postgres psql -c "SHOW SERVER_ENCODING"

psql: could not connect to server: No such file or directory
	Is the server running locally and accepting
	connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"?

Martin Konecny

Is postgresql running/installed?

Try

sudo service postgresql start

Dustin Page

I believe postgresql is installed. I ran the command suggested.

mckendree@radio:~$ sudo service postgresql start

[sudo] password for mckendree:

mckendree@radio:~$ sudo -u postgres psql -c "SHOW SERVER_ENCODING"

psql: could not connect to server: No such file or directory

Is the server running locally and accepting

connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"?

mckendree@radio:~$ sudo apt-get install postgresql

Reading package lists... Done

Building dependency tree

Reading state information... Done

postgresql is already the newest version.

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

mckendree@radio:~$

Martin Konecny

I'm really not sure what's wrong with your database installation. Please purge the installation like so:

sudo apt-get purge postgres*

This will completely remove all postgresql packages. Then try

sudo apt-get install postgresql

again.

Howdy, Stranger!

Categories

Poll

Top Posters