Recent Discussions on Sourcefabric Forum

manual en español

Douglas Antonio Paredes Marquina — Fri, 29 Jul 2011 09:35:18 -0400

Amigos... amigas...Alhuien tendra un manual de newscoop o de campsite en español. le agradeceria me indicaran alguna direccion para bajarlo.

saludos...

Douglas

Bit of trouble...

John Flower — Thu, 17 May 2012 06:37:35 -0400

Recently got into online radio streaming, and decided to set up my own shoutcast server. This was all good and all, but sc_trans was very limited when it came to controlling the media. So I searched around and stumbled upon airtime.

Anyways, I'm having a bit of trouble installing. I should note I am using nginx, instead of apache, and command line install, rather than the .deb install method.

Attached is my install log and a truncated pypo.log.

Airtime as the international rights licensing solution?

Daniel James — Mon, 14 May 2012 06:59:12 -0400

If you have an interest in online radio and TV streaming, you will no doubt be aware that content licensing across national borders is a real headache. The problem is such that services including turntable.fm and BBC iPlayer are available in their host countries only, using IP address geolocation blocking.

So why not place an Airtime server in each country you want to stream to, complying with national licensing regulations, but pulling content and schedule data from a network of other Airtime instances? We already have the beginning of an API for schedule export, and data can be shared over rsync. We can then have decentralised syndication, but with a shared schedule that can be altered locally, for example to insert your local news bulletins.

This would also help solve one of the other problems for media start-ups, which is that producing 24/7 original content is really expensive (the reason why so many radio stations now rely on music automation to fill time).

Airtime would then be not just another broadcast automation application that happens to run on the web, but a platform for solving your pressing business problems of licensing and production costs. All you then have to do is find other radio stations that you want to share your original content with.

You no longer care that you can't afford US streaming royalties, because your content can appear on dozens of US stations. Or if you have more commercial ambitions, you can rent secondary servers in the US and do your licensing paperwork there.

Thoughts? Flames? :-)

Embedded Player Solution HTML5/iOS

Bob Zurunclε — Sun, 13 May 2012 13:22:47 -0400

Good Morning All!

This might not be the best place for this question but I've not found the information I'm looking for online anywhere

As a part of the Airtime broadcast solution, I've cobbled together an embedded web player solution using a php script to read the content tags and ffmp3 to play the stream

The problem is it will not work with iOS seeing as the player core is based on flash

Is there an HTML5 solution that will work for iOS?

I've poked around and the code snippets that supposedly work don't for iphone/ipad

Obviously there might not be a complete solution but perhaps using browser detect and then provide a couple player options

Anyone tackled this issue?

Thanks

Setup Newscoup on EC2 (without a domain name)

Daniel Griffin — Tue, 08 May 2012 13:45:27 -0400

Hi there,
I am trying to setup Newscoup on a micro instance of the Amazon AMI (CentOS) in EC2. I have all the dependencies resolved but the only step from the manual (http://en.flossmanuals.net/newscoop-4-journalists-en-4-0/manual-installation/) that I can't complete is the virtual hosts setup. This is an evaluation setup so there is no associated domain name, and I will need to share it with my colleagues so local hosts settings wont be enough. When I try to run setup without this step I just get a blank page at http://instance_name/install/. PHP errors are turned on but the source for the page is empty. Does any one have any ideas how to get around this problem please? Or perhaps I am doing something else incorrectly?
Thanks in advance for any help you can provide.
Daniel

Off Air Script Solution?

Bob Zurunclε — Sun, 13 May 2012 13:31:39 -0400

Periodically Airtime will go "Off Air" while show content is programmed and running

What would be the most elegant way to automatically restart icecast?

Pseudo code:

Do while

Airtime = "on air" & Program Schedule = "active"

       If Airtime = "off air"
             restart icecast
             eMail Alert Someone
       End If

Next

Thanks!

Newscoop 4 Installation error

George Hadjichristofi — Wed, 25 Apr 2012 13:17:10 -0400

Hello,

I would like to install but i have this error.

Warning: require_once(__DIR__/../application.php) [function.require-once]: failed to open stream: No such file or directory in /home/cooeo/public_html/install/index.php on line 16

Fatal error: require_once() [function.require]: Failed opening required '__DIR__/../application.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/cooeo/public_html/install/index.php on line 16

iFailed

stefan s — Wed, 16 May 2012 14:17:32 -0400

hi,

i'm a noob and i've also failed to successfully install airtime 2.0.3. i had it previously installed on the same machine but because somehow i managed to corrupt some files, i decided to apt purge and reinstall manually as shown here.
now this is what i have:

AIRTIME_STATUS_URL             = http://localhost:80/api/status/format/json/api_key/%%api_key%%
AIRTIME_SERVER_RESPONDING      = OK
KERNEL_VERSION                 = UNKNOWN
MACHINE_ARCHITECTURE           = UNKNOWN
TOTAL_MEMORY_MBYTES            = UNKNOWN
TOTAL_SWAP_MBYTES              = UNKNOWN
AIRTIME_VERSION                = UNKNOWN
OS                             = Ubuntu 10.04.4 LTS i686
CPU                            = AMD Turion(tm) 64 X2 Mobile Technology TL-56
WEB_SERVER                     = A
PLAYOUT_ENGINE_PROCESS_ID      = FAILED
PLAYOUT_ENGINE_RUNNING_SECONDS = 0
PLAYOUT_ENGINE_MEM_PERC        = 0%
PLAYOUT_ENGINE_CPU_PERC        = 0%
LIQUIDSOAP_PROCESS_ID          = FAILED
LIQUIDSOAP_RUNNING_SECONDS     = 0
LIQUIDSOAP_MEM_PERC            = 0%
LIQUIDSOAP_CPU_PERC            = 0%
MEDIA_MONITOR_PROCESS_ID       = FAILED
MEDIA_MONITOR_RUNNING_SECONDS = 0
MEDIA_MONITOR_MEM_PERC         = 0%
MEDIA_MONITOR_CPU_PERC         = 0%
RABBITMQ_PROCESS_ID            = FAILED
RABBITMQ_RUNNING_SECONDS       = 0
RABBITMQ_MEM_PERC              = 0%
RABBITMQ_CPU_PERC              = 0%

i tried everything i found on forums regarding this error but no luck.
any ideas?

Notes on Airtime 2.1.0 beta 6

Wade Eilrich — Wed, 09 May 2012 17:20:01 -0400

Things I like about beta 6
1) Clean interface (headers, information, controls) in Playlist Builder
2) Sound preview - jPlayer works perfectly!
3) Color system for playlists and shows - very intuitive and helpful
4) System->Playout history - all the output format choices work perfectly

Things I'm having trouble with
1) Live shows - I can get a live show to run if I modify ls_script.liq, but I have yet to figure out how to use the web interface to create a show and plug it in seamlessly. For instance, I would like to make a show called "Live at Five" and schedule a feed to interrupt whatever is playing at that time with the live show. To test it out, I use the Shoutcast plugin for WinAmp and mike myself. I think I'm running afoul of the username/password fields in the System->Stream settings. I have no mount point because it is Shoutcast. Oh well, I'm having fun playing with it and, for now, I can use the "default" setting in ls_script.liq to cut over to the live show when it connects. I'm also looking at creating a "harbor", but haven't gotten that to work correctly yet.
2) Hardware Audio Output - when I enable this, my stream never connects and I hear nothing from the speakers connected to the server. This probably has to do with the ALSA setup, but I know the sound hardware works because I've can manually play music through it to the speakers.

Airtime requirements for community radio

Todd Fisher Wallin — Mon, 14 May 2012 13:39:53 -0400

I am the operations coordinator for a community radio station in the US, WDRT. Our entire operation is based on opensource software, and where possible hardware. We currently run Rivendell for our automation system. While an extremely powerful and rock solid stable tool, it has proven to be too complex for a volunteer based organization. The project itself also has some technical and social issues. Airtime has evolved to the point that we are seriously looking to migrate to it. I also work with several community radio organizations and would like to help get it to a point that it could be recommended to other radio stations, and even work on an out of the box debian-based install that includes airtime, and other packages. I have had an airtime sandbox installed on a VM since version 2.0.0.

Here is my list of must haves, before we can put it into production at WDRT:

1) flac support - we have a library of over 30000 tracks and lossless is important to our workflow

2) read ALL of the airtime supported metadata fields from vorbis comments on import - currently if 'LABEL' is in the vorbis comments, it is not read into the database when you import the track and it is required for soundexchange reporting on our webstream here in the US... see #1

3) track statistics such as number of times played - this is critical for tracking underwriting spots

Other features that would be useful for community radio:

1) ability to manually start a playlist in case a live event goes over the scheduled time

2) the concept of scheduler codes for tracks that should only be played during certain time periods, or should expire after a certain date

I am more than willing to help in anyway that I can. I haven't written any code in years, but can hack my way around a bit, and I'm great at finding bugs!

Thoughts...

Dragon

Airtime for Turnkey Linux

rik goldman — Tue, 15 May 2012 10:55:51 -0400

I intend to submit a patch to derive a dedicated Airtime appliance ISO from TurnKey Linux (Lucid or Squeeze). I have shared a preliminary patch on their forums at http://www.turnkeylinux.org/forum/general/20120513/viable-patch-candidate-airtime-broadcasters. Where the patch is failing is at starting rabbitmq-server; the installation fails on both Squeeze and Lucid cores. I'm reading this thread now with interest. I'll pursue the solutions outlined on that thread while keeping in mind this is for a chroot env that is unconfigured. I'm eager to complete this patch and looking forward to advocating for a place for airtime in ed tech as appropriate. I look forward to your feedback/responses.

how to get $_GET variables in NS 4.0

Tomasz Rondio — Wed, 16 May 2012 08:51:33 -0400

in 3.5 this code worked well

{{php}}
$this->assign("page",$_GET['ls-art1']);
{{/php}}

but in 4.0 there is new smarty. I tried $template.get.ls-art1 and it returns 0. Probably there is a problem with "-" in variable name.

Any ideas?

I Upload files, but after server reboot part of them is missing

Evgeniy Loktev — Fri, 11 May 2012 12:49:49 -0400

Hello, i have a problem with database files. I add it to server from standart airtime uploader, for example 10 files. But after server restart i see only 5 or 6, any number other than 10. I have really big database of podcasts on 100gb. But i dont want copy it every time, when server is shut down. Who have same problem?

by the way. I see in media folders that name of files:

DPJ64O~Y.MP3

DE1HFM~B.MP3

Digital Emotions (23.11.2011)-192kbps.mp3

D4PQUF~H.MP3

why some files have strange names after import?

SCREENSHOTS:

http://www.dropmocks.com/mBi2A1 ... so wher is other 18 files!?!?!?

This problem i saw in 2.03 and higher.

Please help and fix this BIG BUG))

2.0.3 not recording shows

James Dunn — Tue, 01 May 2012 19:55:17 -0400

Hi guys,

So I successfully installed 2.0.3 on a new machine and the archive has been upgraded. We went live with this today but Airtime 2.0.3 has not been recording all the shows. This is different to a previous error we had where the ecasound command wasn't even issued. Now the command is issued but returns an error code 1. Please see the attached logs. Luckily we are still running the other machine and recording from there.

thanks
James

debian packages for development?

Todd Fisher Wallin — Mon, 14 May 2012 22:14:19 -0400

Unless there is something existing that I am unaware of, I am wondering if there is any interest in debian packages being available for the development branch... I am willing to help with this if there is interest, and it would sure make it easy to track devel updates.

Todd

Обновление Newscoop 3.5.3 до версии 4.0

an.sa — Tue, 15 May 2012 16:21:53 -0400

Добрый!

Пытаюсь обновить Newscoop до четвертой версии.

В браузер выводит только Upgrading the database from version 3.5.x...

В логах сервера имеем следующую запись:

[Tue May 15 23:07:08 2012] [error] [client 192.168.1.2] PHP Fatal error: Maximum execution time of 600 seconds exceeded in /srv/www/htdocs/library/Doctrine/ORM/UnitOfWork.php on line 417

Что может быть?

Airtime installation (Media Monitor) fails on Ubuntu Natty

Roland Feder — Tue, 08 May 2012 10:53:04 -0400

Hello Sourcefabric developers and users,
I'm experiencing issues with Airtime. I tried installing it by building it from source (Debian Squeeze) and tried it on Ubuntu Natty & Maverick.
I'm trying the install on a VPS.
But somehow the media monitor seems to fail. Log after installation:

AIRTIME_STATUS_URL             = http://localhost/api/status/format/json/api_key/%%api_key%%
AIRTIME_SERVER_RESPONDING      = OK
KERNEL_VERSION                 = 2.6.18-308.el5.028stab099.3
MACHINE_ARCHITECTURE           = i686
TOTAL_MEMORY_MBYTES            = 1572864
TOTAL_SWAP_MBYTES              = 0
AIRTIME_VERSION                = 2.0.3
OS                             = Ubuntu 11.04 i686
CPU                            = Intel(R) Xeon(R) CPU E31240 @ 3.30GHz
WEB_SERVER                     = Apache/2.2.17 (Ubuntu)
PLAYOUT_ENGINE_PROCESS_ID      = 21670
PLAYOUT_ENGINE_RUNNING_SECONDS = 191
PLAYOUT_ENGINE_MEM_PERC        = 0.6%
PLAYOUT_ENGINE_CPU_PERC        = 0.0%
LIQUIDSOAP_PROCESS_ID          = 21677
LIQUIDSOAP_RUNNING_SECONDS     = 191
LIQUIDSOAP_MEM_PERC            = 1.2%
LIQUIDSOAP_CPU_PERC            = 0.0%
MEDIA_MONITOR_PROCESS_ID       = FAILED
MEDIA_MONITOR_RUNNING_SECONDS = -1
MEDIA_MONITOR_MEM_PERC         = 0%
MEDIA_MONITOR_CPU_PERC         = 0%
RABBITMQ_PROCESS_ID            = 20139
RABBITMQ_RUNNING_SECONDS       = 201
RABBITMQ_MEM_PERC              = 1.0%
RABBITMQ_CPU_PERC              = 0.0%

-- There appears to be a problem with your Airtime installation.

Okay, so the problem seems to be Media-Monitor not starting.
Media Monitor logfiles gave this:

user@ubserver:/var/log/airtime/media-monitor$ tail -f media-monitor.log
2012-05-08 18:51:54,128 INFO - [MainThread] [MediaMonitor.py : ()] : LINE 39 - Setting up monitor
2012-05-08 18:51:54,375 INFO - [MainThread] [api_client.py : setup_media_monitor()] : LINE 410 - Connected to Airtime Server. Json Media Storage Dir: {u'watched_dirs': [], u'stor': u'/srv/airtime/stor/'}
2012-05-08 18:51:59,375 INFO - [MainThread] [MediaMonitor.py : ()] : LINE 47 - Storage Directory is: /srv/airtime/stor/
2012-05-08 18:51:59,377 ERROR - [MainThread] [MediaMonitor.py : ()] : LINE 56 - Exception: [Errno 38] Function not implemented
2012-05-08 18:51:59,389 ERROR - [MainThread] [MediaMonitor.py : ()] : LINE 95 - Exception: name 'multi_queue' is not defined
2012-05-08 18:51:59,389 ERROR - [MainThread] [MediaMonitor.py : ()] : LINE 96 - traceback: Traceback (most recent call last):
File "/usr/lib/airtime/media-monitor/MediaMonitor.py", line 63, in
pe = AirtimeProcessEvent(queue=multi_queue, airtime_config=config, wm=wm, mmc=mmc, api_client=api_client)
NameError: name 'multi_queue' is not defined

2012-05-08 18:52:03,893 INFO - [MainThread] [MediaMonitor.py : ()] : LINE 32 -

*** Media Monitor bootup ***

2012-05-08 18:52:04,114 INFO - [MainThread] [MediaMonitor.py : ()] : LINE 39 - Setting up monitor
2012-05-08 18:52:04,344 INFO - [MainThread] [api_client.py : setup_media_monitor()] : LINE 410 - Connected to Airtime Server. Json Media Storage Dir: {u'watched_dirs': [], u'stor': u'/srv/airtime/stor/'}

Please request any other needed logfiles. Maybe this is a resolved issue, but I couldn't find anything on it.
Thanks,
me.

Llega Newscoop 4.0 Beta

Claudia Cruz — Thu, 15 Dec 2011 14:21:49 -0500

¡Hola!

Nos complace anunciarles la llegada de Newscoop 4.0 beta, ¡pueden descargarlo y probarlo desde ya!

Newscoop 4.0 integra una nueva plataforma para la administración de comunidades, permite la total renovación de la presentación de tu sitio con los Temas y añade amplias funcionalidades extras para ordenar, conectar y desplegar artículos. Si agregamos a esto muchos arreglos de fallas y mejoras en el desempeño general podemos decir que es uno de los lanzamientos más impresionantes que hemos hecho.

Como siempre, la versión "beta" de un software implica que su desarrollo aún está en marcha, de tal manera que Newscoop 4.0 aún no se recomienda para sitios de producción o en pleno funcionamiento. Y aquí es donde tu participación puede marcar la diferencia. Al visitar el wiki, instalarlo, probarlo y reportar fallas, no solo ayudas a nuestro equipo de desarrollo sino también a cientos de medios independientes que dependen de Newscoop.

Así que va un agradecimiento para quienes nos ayudaron a que este beta fuera una realidad y de antemano, gracias a quienes nos ayuden a perfeccionarlo. Además, una gran felicitación para el equipo de desarrollo de Newscoop por el gran esfuerzo realizado para que esto fuera posible.

Puedes reportar fallas directamente a los desarrolladores en este foro (preferiblemente aquí) por favor crea un nuevo tema (thread) para cada falla.

Sin más te dejamos con... Newscoop 4.0 beta!

Atentamente,

Claudia (en nombre de Adam Thomas)

Move Airtime web to other (web-)location

FredFlinstone — Sun, 13 May 2012 05:33:32 -0400

hi friends,
I have installed Airtime on Ubuntu Server 11. For this server I have not accessible port 8080, therefore I have to use only 80 port (for web purpose).
For default installation I have:
1.) in file "/etc/apache2/sites-enabled/airtime" (or mirrored file "/etc/sites-available/airtime") following content:

    ServerAdmin ...
    DocumentRoot /usr/share/airtime/public
    php_admin_value upload_tmp_dir /tmp

        DirectoryIndex index.php
        AllowOverride all
        Order allow,deny
        Allow from all


2.) in file "/etc/airtime/airtime.conf" is following content:
[database]
host - localhost
...
[rabbitmq]
host = 127.0.0.1
port = 5672
...
vhost = /
[general]
api_key = ...
web+server_user = www-data
airtime_dir = /usr/share/airtime
base+url = localhost
base_port = 80
...
3.) file "/etc/apache2/httpd.conf" is empty
If I try from some PC following URL:
http://218.76.65.129
is displayed home page of "Airtime" web site.

And now, I would like to change web-location for "Airtime" web pages to:
http://218.76.65.129/Airtime
(listen on the same port (80)), and base URL (http://218.76.65.129) remain to use for some other HTML page (or for some CMS system).

Please how can I change setting for Airtime and (or) for Apache for this issue?

PS: I try add row "ServerName Airtime" to file "/etc/apache2/sites-enabled/airtime", but it is not working. Again for base URL (http://218.76.65.129) is responsed "Airtime" (and for URL: http://218.76.65.129/Airtime, it is redirected to base URL (http://218.76.65.129) and displays "Airtime"page).

Please help me.

very thanks

Airtime-Dev Issues

Bob Zurunclε — Wed, 02 May 2012 19:05:29 -0400

Good Afternoon:

I know the guys are working on the dev version to resolve some serious issues that were found

I installed the latest dev version just now and the import issues (at least so far) seem to be working at least there is some signs of it working

I created a playlist and scheduled a show.

The show would not go on air where as it did in the past (Beta 5)

I did a restart of playout and icecast to no avail

Suggestions?

airtime easy install hangs on monit

Anthony Fox-Davies — Mon, 14 May 2012 15:29:07 -0400

Hello peeps,

After realising that airtime wasn't supported on 12.04 yet I rebuilt my Ubuntu server as 10.04 and went for the easy install.

It seems to go well until this:

Setting up monit configuration...
Stopping daemon monitor: monit.
Starting daemon monitor: monit.
sed: -e expression #1, char 32: unknown option to `s'

then it hangs and I have to reboot.

Any ideas?

Booktype Installation for TurnKey Linux, Part 1

rik goldman — Fri, 17 Feb 2012 13:16:20 -0500

In the interest of eventually building a patch to bring Turnkey LAPP 11.2 to a booktype appliance, I've made build notes for my first successful installation. It's posted here for now. These build notes are for TurnKey Linux's Django appliance. My next set of notes will be for LAPP.

[resolu] Hello a tous/tes + questions

Fred Percevault — Sat, 12 May 2012 06:24:10 -0400

Bonjour,

J'ai utilisé Liquidsoap / Shoutcast pendant 3 ans, de façon plutot basique

(scheduling plusieurs fois par jour, jingles en fonction des playlist jouées, un peu de live streaming depuis la maison...)

puis j'ai laissé tombé, plus le temps ( "subflow" pour ceux qui sont abonnés a la mailing list de Liquidsoap)

Je me lance de nouveau avec Airtime, car je n'aurais plus qu'a gérer le serveur et Airtime mais pas la musique.

et ça c'est le big avantage

J'ai donc sur mon serveur une grosse archive sons (99% de musique netlabel et donc sous licence Creative Commons et libre)

Cette archive est dans mon repertoire /home (partition séparée de 900Go)

Je voudrais que toute la musique (existante et uploadé dans le futur ) soit sur cette partition pour des raisons d'espace bien sur

J'ai crée un "Import folder" dans /home

1/ Je n'ai pas compris a quoi sert "Watched folder" ?

2/ la musique restera stockée sur mon /home et la base de donnée Airtime ne contient que des référence aux tracks mp3 ?

(je ne voudrais me retrouver avec une bdd postgre de "n Giga")

Merci a vous

multiple issues =>headache :)

Fred Percevault — Sun, 13 May 2012 09:06:54 -0400

Hello,

About me, it seem a long and not yet finished story to get Airtime working :)

Right after installing Airtime the final check was good

(Debian 64bit grsec kernel)

Airtime is now well connected with postgresql db

then

I've try to upload music :

Airtime don't see uploaded track and is unable to detect my music in my "watched folder"

Airtime is not connected to Icecast, it's always stuck on "Getting information from the server" in the web interface

after investigating my log and ran the "/etc/init.d/airtime-media-monitor status" command

AIRTIME_STATUS_URL = http://localhost/api/status/format/json/api_key/%%api_key%%
AIRTIME_SERVER_RESPONDING = OK
KERNEL_VERSION = UNKNOWN
MACHINE_ARCHITECTURE = UNKNOWN
TOTAL_MEMORY_MBYTES = UNKNOWN
TOTAL_SWAP_MBYTES = UNKNOWN
AIRTIME_VERSION = UNKNOWN
OS = Debian GNU/Linux 6.0.4 (squeeze) x86_64
CPU = Intel(R) Core(TM) i3-2130 CPU @ 3.40GHz
WEB_SERVER = A
PLAYOUT_ENGINE_PROCESS_ID = FAILED
PLAYOUT_ENGINE_RUNNING_SECONDS = 0
PLAYOUT_ENGINE_MEM_PERC = 0%
PLAYOUT_ENGINE_CPU_PERC = 0%
LIQUIDSOAP_PROCESS_ID = FAILED
LIQUIDSOAP_RUNNING_SECONDS = 0
LIQUIDSOAP_MEM_PERC = 0%
LIQUIDSOAP_CPU_PERC = 0%
MEDIA_MONITOR_PROCESS_ID = FAILED
MEDIA_MONITOR_RUNNING_SECONDS = 0
MEDIA_MONITOR_MEM_PERC = 0%
MEDIA_MONITOR_CPU_PERC = 0%
RABBITMQ_PROCESS_ID = FAILED
RABBITMQ_RUNNING_SECONDS = 0
RABBITMQ_MEM_PERC = 0%
RABBITMQ_CPU_PERC = 0%

In pypo-liquidsoap log : (ls_script.log)

2012/05/13 14:50:09 [airtime_128:3] Connecting mount airtime_128 for admin@127.0.0.1...
2012/05/13 14:50:09 [airtime_128:2] Connection failed: 401, Authentication Required (HTTP/1.0)
2012/05/13 14:50:09 [lang:3] /usr/lib/airtime/pypo/bin/liquidsoap_scripts/notify.sh --error='401, Authentication Required (HTTP/1.0)' --stream-id=1 --time=1336910144.76
2012/05/13 14:50:09 [airtime_128:3] Will try again in 5.00 sec.

In pypo.log

404 Not Found
Not Found
The requested URL /api/version/api_key/HLT935MODL7XM9BRW91K was not found on this server.

2012-05-13 14:51:26,046 ERROR - [api_client.py : __get_airtime_version() : line 213] - Unable to detect Airtime Version - No JSON object could be decoded
2012-05-13 14:51:26,046 INFO - [api_client.py : is_server_compatible() : line 239] - Unable to get Airtime version number.

2012-05-13 14:51:27,195 DEBUG - [pypo-notify.py : notify_liquidsoap_status() : line 88] - #################################################
2012-05-13 14:51:27,195 DEBUG - [pypo-notify.py : notify_liquidsoap_status() : line 89] - # Calling server to update liquidsoap status #
2012-05-13 14:51:27,195 DEBUG - [pypo-notify.py : notify_liquidsoap_status() : line 90] - #################################################
2012-05-13 14:51:27,195 DEBUG - [pypo-notify.py : notify_liquidsoap_status() : line 91] - msg = 401, Authentication Required (HTTP/1.0)
2012-05-13 14:51:27,196 DEBUG - [api_client.py : notify_liquidsoap_status() : line 590] - http://localhost:80/api/update-liquidsoap-status/format/json/api_key/HLT935MODL7XM9BRW91K/msg/401%2C%20Authentication%20Required%20%28HTTP%201.0%29/stream_id/1/boot_time/1336910144.76
2012-05-13 14:51:27,197 ERROR - [api_client.py : notify_liquidsoap_status() : line 594] - Exception: HTTP Error 404: Not Found
2012-05-13 14:51:27,197 DEBUG - [pypo-notify.py : notify_liquidsoap_status() : line 93] - Response: null

in media-monitor.log

2012-05-13 14:54:24,485 ERROR - [MainThread] [api_client.py : register_component()] : LINE 577 - Exception: HTTP Error 404: Not Found
2012-05-13 14:54:24,485 INFO - [MainThread] [MediaMonitor.py : ()] : LINE 39 - Setting up monitor
2012-05-13 14:54:24,486 ERROR - [MainThread] [api_client.py : setup_media_monitor()] : LINE 413 - Exception: No JSON object could be decoded

What is the cc_subjs schema?

John Galt — Wed, 09 May 2012 21:01:37 -0400

There is a current bug in installation of Airtime 2.0.3 that for some reason wont create the first user, so I have to go into postgre myself and add it. I am now just wondering what needs to go into the 'type' field. I tried 'a' for admin but Zend framework doesn't accept that.

2.1 Beta Documentation on master/show sources, and LIVE Stream Show auth types.

Stephen — Tue, 08 May 2012 12:45:51 -0400

Are there beta docs for 2.1 yet?

Currently in 1.94, i use icecast fallbacks, so live talk shows coming from freeswitch play if they exist, falling back to airtime playout when live stops automatically, this works pretty well, but we still occasionaly have issues with different flash clients, and itunes etc... occasionaly not handling the fall back correctly

In 2.1 im looking to eliminate the icecast fallbacks all together and want to send live freeswitch stream direct to liqiidsoap. I am able to connect to master source and switch manually in airtime between the master and scheduled play with butt source client, but not sure if its possible to have airtime always revert to scheduled automatically when master disappears.

Also not clear on the LIVE STREAM option in show.

If i schedule in calendar a LIVE SHOW, then start up master during this time does master or source auto play? for show.

Any guidance much appreciated. Im debugging the freeswitch/liquidsoap integration right now, it currently is crashing freeswitch, and giving me some auth issues.

Thanks

Stephen

UTF vs ISO postgresql solved / Debian Squeeze

Fred Percevault — Sat, 12 May 2012 06:02:50 -0400

Hello,

just to share my experience, I hope it can help, it's only my 2 cents not an "universal truth" :-)

Locales and Postgresql :

I had to run "dpkg-reconfigure locales" and uncheck all "iso-8..."locales BEFORE installing postgresql

since Postgresql only create Db in ISO encoding an not UTF when ISO locales are also selected (it was the case on my machine..)

I keep only UTF-8

(Its seems difficult to change DB encoding after install because you have to create an UTF8 cluster and move your previously ISO encoded DB" in it.)

Even if I "apt-get purge remove purge postgresql"... and reinstall it on UTF locales system, the airtime install goes wrong (???)

This must be made on fresh install (again it's my own experience , not the "holy truth")

apt-get vs aptitude :

When using aptitude postgresql 9.1 and 8.4 were proposed

I've experienced few trouble with that, because of dependecies unsatisfied...

My advice : use apt-get (8.4 only is proposed )

Rabbitmq-server :

When installing Rabbitmq with airtime, the install failed during rabbit start (as i remember)

My advice: install Rabbitmq BEFORE Airtime

---------------------------------------------------------------------------

Debian Squeeze

3.2.13-grsec-xxxx-grs-ipv6-64

I3 2x3.4 core / 16Go ram / 1To (raid soft)

Airtime 2.0.2 install problems (Debian&Ubuntu): Zend, root not accepted, dpkg

Andreas Vogelsang — Sun, 01 Apr 2012 19:01:30 -0400

Hi

First off I have to admit that I'm no hero with Linux. Learned enough to get Icecast running using Ices0 for providing an automated playlist. Now I want to take it a step further and use airtime. But no matter what I try (apt-get, minimal install, full install) I always get stuck with two problems:
- Problem with Zend
- airtime-check-system breaks off during the root user check (seems to try /whoami, which won't work on Debian as it's just whoami there)

I'm running Debian Squeeze on AMD64

Here's what happens:

zulu1582:/home/airtime-2.0.2/install_full/debian# sudo ./airtime-full-install
----------------------------------------------------
1. Install Packages
----------------------------------------------------
deb http://www.debian-multimedia.org squeeze main non-free
OK http://debian.intergenia.de squeeze Release.gpg
OK http://www.debian-multimedia.org squeeze Release.gpg
Ign http://www.debian-multimedia.org/ squeeze/main Translation-de
Ign http://www.debian-multimedia.org/ squeeze/main Translation-en
Ign http://www.debian-multimedia.org/ squeeze/main Translation-en_US
Ign http://www.debian-multimedia.org/ squeeze/non-free Translation-de
Ign http://www.debian-multimedia.org/ squeeze/non-free Translation-en
Ign http://www.debian-multimedia.org/ squeeze/non-free Translation-en_US
OK http://www.debian-multimedia.org squeeze Release
OK http://apt.sourcefabric.org squeeze Release.gpg
Ign http://apt.sourcefabric.org/ squeeze/main Translation-de
Ign http://apt.sourcefabric.org/ squeeze/main Translation-en
OK http://www.debian-multimedia.org squeeze/main amd64 Packages/DiffIndex
Ign http://apt.sourcefabric.org/ squeeze/main Translation-en_US
OK http://www.debian-multimedia.org squeeze/non-free amd64 Packages/DiffIndex
OK http://apt.sourcefabric.org squeeze Release
Ign http://apt.sourcefabric.org squeeze/main amd64 Packages
OK http://apt.sourcefabric.org squeeze/main amd64 Packages
OK http://backports.debian.org squeeze-backports Release.gpg
Ign http://backports.debian.org/debian-backports/ squeeze-backports/main Translation-de
Ign http://backports.debian.org/debian-backports/ squeeze-backports/main Translation-en
Ign http://backports.debian.org/debian-backports/ squeeze-backports/main Translation-en_US
OK http://backports.debian.org squeeze-backports Release
OK http://backports.debian.org squeeze-backports/main amd64 Packages/DiffIndex
OK http://backports.debian.org squeeze-backports/main amd64 Packages
Ign http://debian.intergenia.de/debian/ squeeze/contrib Translation-de
Ign http://debian.intergenia.de/debian/ squeeze/contrib Translation-en
Ign http://debian.intergenia.de/debian/ squeeze/contrib Translation-en_US
OK http://debian.intergenia.de/debian/ squeeze/main Translation-de
Ign http://debian.intergenia.de/debian/ squeeze/main Translation-en
Ign http://debian.intergenia.de/debian/ squeeze/main Translation-en_US
Ign http://debian.intergenia.de/debian/ squeeze/non-free Translation-de
Ign http://debian.intergenia.de/debian/ squeeze/non-free Translation-en
Ign http://debian.intergenia.de/debian/ squeeze/non-free Translation-en_US
OK http://debian.intergenia.de squeeze/updates Release.gpg
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/contrib Translation-de
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/contrib Translation-en
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/contrib Translation-en_US
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/main Translation-de
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/main Translation-en
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/main Translation-en_US
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/non-free Translation-de
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/non-free Translation-en
Ign http://debian.intergenia.de/debian-security/ squeeze/updates/non-free Translation-en_US
OK http://debian.intergenia.de squeeze Release
OK http://debian.intergenia.de squeeze/updates Release
OK http://debian.intergenia.de squeeze/main Sources
OK http://debian.intergenia.de squeeze/contrib Sources
OK http://debian.intergenia.de squeeze/non-free Sources
OK http://debian.intergenia.de squeeze/main amd64 Packages
OK http://debian.intergenia.de squeeze/contrib amd64 Packages
OK http://debian.intergenia.de squeeze/non-free amd64 Packages
OK http://debian.intergenia.de squeeze/updates/main Sources
OK http://debian.intergenia.de squeeze/updates/contrib Sources
OK http://debian.intergenia.de squeeze/updates/non-free Sources
OK http://debian.intergenia.de squeeze/updates/main amd64 Packages
OK http://debian.intergenia.de squeeze/updates/contrib amd64 Packages
OK http://debian.intergenia.de squeeze/updates/non-free amd64 Packages
Paketlisten werden gelesen...
Paketlisten werden gelesen...
AbhÃ¤ngigkeitsbaum wird aufgebaut...
Statusinformationen werden eingelesen...
libcamomile-ocaml-data ist schon die neueste Version.
ecasound ist schon die neueste Version.
libesd0 ist schon die neueste Version.
gzip ist schon die neueste Version.
lsb-release ist schon die neueste Version.
libsamplerate0 ist schon die neueste Version.
monit ist schon die neueste Version.
mpg123 ist schon die neueste Version.
multitail ist schon die neueste Version.
libao-ocaml ist schon die neueste Version.
libmad-ocaml ist schon die neueste Version.
libsoundtouch-ocaml ist schon die neueste Version.
libtaglib-ocaml ist schon die neueste Version.
patch ist schon die neueste Version.
php-db ist schon die neueste Version.
libportaudio2 ist schon die neueste Version.
odbc-postgresql ist schon die neueste Version.
libpulse0 ist schon die neueste Version.
python-virtualenv ist schon die neueste Version.
python2.6 ist schon die neueste Version.
rabbitmq-server ist schon die neueste Version.
tar ist schon die neueste Version.
vorbis-tools ist schon die neueste Version.
apache2 ist schon die neueste Version.
curl ist schon die neueste Version.
libapache2-mod-php5 ist schon die neueste Version.
php-pear ist schon die neueste Version.
php5-curl ist schon die neueste Version.
php5-gd ist schon die neueste Version.
php5-pgsql ist schon die neueste Version.
postgresql ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 6 nicht aktualisiert.
Paketlisten werden gelesen...
AbhÃ¤ngigkeitsbaum wird aufgebaut...
Statusinformationen werden eingelesen...
icecast2 ist schon die neueste Version.
lame ist schon die neueste Version.
libmp3lame-dev ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 6 nicht aktualisiert.
Paketlisten werden gelesen...
AbhÃ¤ngigkeitsbaum wird aufgebaut...
Statusinformationen werden eingelesen...
zendframework ist schon die neueste Version.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 6 nicht aktualisiert.
----------------------------------------------------
2. Apache Config File
----------------------------------------------------
Apache config for Airtime already exists...
----------------------------------------------------
3. Enable Icecast
----------------------------------------------------
Starting icecast2:
----------------------------------------------------
4. Enable Monit
----------------------------------------------------
----------------------------------------------------
5. Run Airtime Install
----------------------------------------------------
* Checking for existing Airtime installation...
* None found.

******************************** Install Begin *********************************
Ensuring python-virtualenv version > 1.4.8...Success!

*** Creating Virtualenv for Airtime ***
New python executable in /usr/lib/airtime/airtime_virtualenv/bin/python2.6
Also creating executable in /usr/lib/airtime/airtime_virtualenv/bin/python
Installing distribute.................................................................................................................................................................................done.

*** Installing Python Libraries ***
Unpacking /home/airtime-2.0.2/python_apps/python-virtualenv/airtime_virtual_env.pybundle
Downloading/unpacking poster
Running setup.py egg_info for package poster
Downloading/unpacking pytz
Running setup.py egg_info for package pytz
warning: no files found matching '*.pot' under directory 'pytz'
warning: no previously-included files found matching 'test_zdump.py'
Downloading/unpacking mutagen
Running setup.py egg_info for package mutagen
Downloading/unpacking pyinotify
Running setup.py egg_info for package pyinotify
Downloading/unpacking configobj
Running setup.py egg_info for package configobj
Downloading/unpacking anyjson
Running setup.py egg_info for package anyjson
Downloading/unpacking kombu
Running setup.py egg_info for package kombu
Downloading/unpacking amqplib
Running setup.py egg_info for package amqplib
Installing collected packages: amqplib, anyjson, configobj, kombu, mutagen, poster, pyinotify, pytz
Running setup.py install for amqplib
Running setup.py install for anyjson
Running setup.py install for configobj
Running setup.py install for kombu
Running setup.py install for mutagen
changing mode of build/scripts-2.6/mid3iconv from 644 to 755
changing mode of build/scripts-2.6/moggsplit from 644 to 755
changing mode of build/scripts-2.6/mutagen-inspect from 644 to 755
changing mode of build/scripts-2.6/mutagen-pony from 644 to 755
changing mode of build/scripts-2.6/mid3v2 from 644 to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/mid3iconv to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/moggsplit to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/mutagen-inspect to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/mutagen-pony to 755
changing mode of /usr/lib/airtime/airtime_virtualenv/bin/mid3v2 to 755
Running setup.py install for poster
Running setup.py install for pyinotify
Running setup.py install for pytz
warning: no files found matching '*.pot' under directory 'pytz'
warning: no previously-included files found matching 'test_zdump.py'
Successfully installed amqplib anyjson configobj kombu mutagen poster pyinotify pytz
Cleaning up...

*** Patching Python Libraries ***

---Applying Patches for mutagen---
patching file /usr/lib/airtime/airtime_virtualenv/lib/python2.6/site-packages/mutagen/mp3.py
Hunk #1 succeeded at 205 (offset -4 lines).
patching file /usr/lib/airtime/airtime_virtualenv/lib/python2.6/site-packages/mutagen/mp3.py
Hunk #2 succeeded at 169 (offset -4 lines).
* Checking for user pypo
User already exists.
* Creating /etc/airtime
* Creating /etc/monit/conf.d/monit-airtime-generic.cfg
* Creating /etc/cron.d/airtime-crons
* Creating /usr/lib/airtime
* Creating symbolic links in /usr/bin
* Creating /usr/share/airtime
* Creating /var/log/airtime
* Creating /var/tmp/airtime
* Creating INI files
* Initializing INI files
* Airtime Version: 2.0.2
* Storage directory setup
* Skipping directory already exists: /srv/airtime/stor
* Giving Apache permission to access /srv/airtime/stor
* Skipping directory already exists: /srv/airtime/stor/organize
* Giving Apache permission to access /srv/airtime/stor/organize
PHP Warning: require_once(): Unable to access Zend/Loader/Autoloader.php in /home/airtime-2.0.2/install_minimal/include/AirtimeInstall.php on line 7
PHP Warning: require_once(Zend/Loader/Autoloader.php): failed to open stream: No such file or directory in /home/airtime-2.0.2/install_minimal/include/AirtimeInstall.php on line 7
PHP Fatal error: require_once(): Failed opening required 'Zend/Loader/Autoloader.php' (include_path='/home/airtime-2.0.2/install_minimal/include/../../airtime_mvc/library:/home/airtime-2.0.2/install_minimal/include/../airtime_mvc/library:.:') in /home/airtime-2.0.2/install_minimal/include/AirtimeInstall.php on line 7
Starting Airtime Media Monitor: Done.
* Waiting for media-monitor processes to start...
No handlers could be found for logger "root"
* Detecting OS: ... Found Debian GNU/Linux 6.0.4 (squeeze) (squeeze) on amd64 architecture
* Installing Liquidsoap binary
Unable to connect to the Airtime server.
* Waiting for pypo processes to start...
Stopping daemon monitor: monit.
Starting daemon monitor: monit.

*** Verifying your system environment, running airtime-check-system ***
sh: /whoami: not found
Must be root user.

I hope someone can help me :)

Kind regards
Andreas

Losing Playlists And Content In Playlists

Bob Zurunclε — Sun, 22 Apr 2012 22:30:38 -0400

Good Evening:

We've had list happen a couple times before and it just happened today wiping out a majority of our play lists

Running 2.0.3 with the content stored on an NAS and the playlist content will just disappear

The content is still on the NAS but not in the play lists

The playlists that survived we created using content stored locally on an internal hard drive

Is there any way to recover these lists?

Help

substance.io

elf Pavlik — Mon, 14 May 2012 13:48:36 -0400

hello,

http://substance.io/substance/getting-started

looks interesting, i wonder if anyone here have evaluated that free software?

cheers!