James Dunn

1.9.1 upgrade problems
Hi Paul, Please find attached the logs. There was a show scheduled for 19:00 - 21:00 yesterday which didn't record, and a show on now (10:00 to 12:00) which is also not recording, but I can't see any errors in the show-recorder log re…

Comment by James Dunn August 2011 permalink
1.9.1 upgrade problems
Hi Martin, thanks for letting me know about this. I noticed 1.9.2 is available for download on the sourceforge site so I have just installed it, however I have some problems. The show-recorder doesn't seem to be working. I scheduled a…

Comment by James Dunn August 2011 permalink
1.9.1 upgrade problems
Also, here's the output from the attempted upgrade: sudo ./airtime-install ******************************** Install Begin ********************************* *** Creating Virtualenv for Airtime *** Running virtualenv with interpreter …

Comment by James Dunn August 2011 permalink
No "on air" light and no streaming
In airtime 1.9.0 you need to change /var/www/airtime/public/.htaccess /etc/php5/apache2/php.ini is no longer used. James

Comment by James Dunn August 2011 permalink
Fallback and AutoDJ
I am also interested in streaming the live shows which are being recorded. One solution I found in airtime 1.8.2 was to modify /usr/lib/airtime/show-recorder/recorder.py as follows: change: command = "ecasound -i alsa -o %s -t:%s" %…

Comment by James Dunn August 2011 permalink
Fallback and AutoDJ
1.9.0 uses init.d: sudo service airtime-playout stop sudo service airtime-playout start

Comment by James Dunn August 2011 permalink
1.9.0 upgrade problems
Ok thanks, that fixed the time and recording issues. Is there a new command to replace airtime-pypo-stop and airtime-pypo-start? Or, how do I restart liquidsoap after changing the settings in /etc/airtime/liquidsoap.cfg without rebooting? tha…

Comment by James Dunn August 2011 permalink
1.9.0 upgrade problems
Ok I tried completely removing airtime and then installing 1.9.0 manually from the instructions here: http://wiki.sourcefabric.org/display/CC/Manual+Install No errors were reported in the install process, however the server time still says…

Comment by James Dunn August 2011 permalink
1.9.0 upgrade problems
Hi guys, I followed the instructions here on the wiki: http://wiki.sourcefabric.org/display/CC/Upgrading+to+Airtime +1.9.0 I just copied and pasted the commands so it should have installed python-virtualenv... just checking synaptic …

Comment by James Dunn August 2011 permalink
airtime-1.9.0-RC1 issues
OK thanks for the responses James

Comment by James Dunn July 2011 permalink
airtime-1.9.0-RC1 issues
Hi James, I've been manually installing from the tarball on the website, upgrading from 1.8.2 to the latest 1.9.0-RC1. If I do a clean install the country options are fine, but I need to preserve our schedule so I have been using the instr…

Comment by James Dunn July 2011 permalink
Recorded show ending prematurely
Ok I set the max_sectors to 128 but it happened again today so that fix doesn't work for me. I think a better solution might be to change the show-recorder directory back to the local hard drive. The problem with this is that the drive is small…

Comment by James Dunn July 2011 permalink
Change mp3 bitrate
try putting it like this: if output_icecast_mp3 then out_mp3 = output.icecast(%mp3(bitrate=96), host = icecast_host, port = icecast_port, password = icecast_pass, mount = mount_point_mp3, fallible = true, …

Comment by James Dunn July 2011 permalink
No "On Air", very strange....
Read my thread here: http://forum.sourcefabric.org/index.php/t/3785/ I don't know if it will help you with the no sound issue, but I've managed to change the storage location. James

Comment by James Dunn July 2011 permalink
Files not being recorded after changing default directory
Ok so I think I've really found a solution this time. I did a clean install of 1.8.2 and imported my schedule. Then ran the following commands: sudo mkdir /media/airtime/airtime cd /srv/airtime sudo mv stor /media/airtime/airtime …

Comment by James Dunn July 2011 permalink
Unable to download recorded show
Hi Chris, thanks for that. Also, changing base_url = localhost to: base_url = example.com in /etc/airtime/airtime.conf works too. James

Comment by James Dunn July 2011 permalink
Files not being recorded after changing default directory
Well it turns out that this now works for sudo airtime-import and upload via the web ui, but the recorded shows are still not imported into the database! They are listed in the playlist builder, but no files are copied to the storage directory. …

Comment by James Dunn July 2011 permalink
Files not being recorded after changing default directory
Ok to answer my own question again I had a directory called stor in /media/airtime/airtime, and the owner was root:www-data, but the permissions differed slightly. original: drwxrwsr-x 2 root www-data 4096 2011-07-05 11:18 stor …

Comment by James Dunn July 2011 permalink
Files not being recorded after changing default directory
So I've made a directory on the external hard drive called airtime and edited /etc/airtime/airtime.conf to say: base_files_dir = /media/airtime/airtime This is with a clean install of 1.8.2 on Ubuntu 10.10 32-bit and I still can'…

Comment by James Dunn July 2011 permalink
Files not being recorded after changing default directory
Ok, so I reformatted the external drive to ext4 and created a show-recorder directory with pypo:pypo ownership. Now shows are recorded to this folder ok, but it still doesn't work for the database directory. I saw this old post: htt…

Comment by James Dunn July 2011 permalink
Files not being recorded after changing default directory
Ok, I tried changing the owner of /media/Elements/show-recorder to pypo:pypo but that didn't work so I assume it's a file-system thing. Can anyone confirm this? Would be good to know before I reformat the whole drive!

Comment by James Dunn July 2011 permalink
Exception installing pynotify and mutagen
I'm not at my linux box at the moment but I think I did: sudo dpkg -r python-mutagen or sudo apt-get remove python-mutagen

Comment by James Dunn July 2011 permalink
Airtime 1.9 beta issues
Hi Martin, thanks for the info. I did a reinstall of airtime 1.9 beta and now have the following issues: 1) Upload via web ui works fine, but copying files to /srv/airtime/stor or adding a watched directory doesn't work. 2) …

Comment by James Dunn June 2011 permalink
Unable to download recorded show
Ok good to know, thanks. Yes I was trying to download from a remote computer, will try it again from the server when I'm next in the studio. James

Comment by James Dunn June 2011 permalink
1.8.2 not streaming to Icecast
Ok it seems my issue was just a space in the mount point name. Changing that to an underscore means I get a stream in Icecast!

Comment by James Dunn June 2011 permalink
1.8.2 not streaming to Icecast
Ok, so the test command works. I can see the mount point at the Icecast server and get the following output from the command: james@james-desktop:/usr/lib/airtime/pypo/bin/liquidsoap$ ./liquidsoap 'output.icecast(%vorbis, mount="test.…

Comment by James Dunn June 2011 permalink
1.8.2 not streaming to Icecast
Ok I ran the test but got this error: At line 1, char 60: the variable hackme is used but was not previously defined. EDIT: password needs to be in "quotations" I'll check this fully when I get home James

Comment by James Dunn June 2011 permalink
1.8.2 not streaming to Icecast
When I first installed airtime and icecast I changed the default passwords to my own and things worked fine. Since upgrading to 1.8.2-RC5 and later I haven't been able to connect to Icecast. I have also imported a database backup from the produ…

Comment by James Dunn June 2011 permalink
1.8.2 not streaming to Icecast
Ok thanks I tried that command and this is what I got: james@james-desktop:/usr/lib/airtime/pypo/bin/liquidsoap$ ./liquidsoap 'output.icecast(%vorbis, mount="test.ogg", sine())' 2011/06/15 16:28:29 >>> LOG START 2…

Comment by James Dunn June 2011 permalink
Airtime 1.8.2-RC5 issues
Quote:Regarding the icecast problem, do you see any mountpoints when you go to http://localhost:8000/ ? No, there is no mount point for the airtime stream. I can see the mount point for the butt stream however. I've checked the source…

Comment by James Dunn June 2011 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Follow James Dunn

About

Username: James Dunn
Joined: May 2011
Visits: 0
Last Active: July 2018
Roles: Member
Posts: 226

Friends

My Badges

Total Points: 80

James Dunn

Howdy, Stranger!

About

Friends

My Badges

Top Posters