Verheek

rabbitmq-server fails to install
What does /var/log/rabbitmq/startup_{log, _err} show?

Comment by Verheek July 2011 permalink
Exception installing pynotify and mutagen
Thanks. I guess the dependency python-mutagen can be removed from http:// wiki.sourcefabric.org/display/CC/Installing+Airtime+Dev+Vers ion+%28Latest+Trunk%29 Otherwise it overwrites the newer version. I also did some searching and found out y…

Comment by Verheek July 2011 permalink
Exception installing pynotify and mutagen
OK if I specify the required kombu and poster versions I get exceptions for each one. So how to remove the old versions?

Comment by Verheek July 2011 permalink
rabbitmq-server fails to install
More work on this because I didn't want nullok in my common-auth as it's less secure. What I found was that my su file in /etc/pam.d was missing. Restoring this from a fresh Ubuntu Lucid install fixed the password prompt during install w…

Comment by Verheek July 2011 permalink
No Audio/On Air light
Hi Martin, I have one VM guest for the .deb and one for the git stuff that's bleeding edge. Just upgraded from 1.7.? to 1.8.2 with apt-get and it went fine. I had to reconfigure my /etc/airtime stuff and everything in the database so…

Comment by Verheek June 2011 permalink
Debian/Ubuntu apt repository -- permissions problem
Hi, I have to add my two cents to the blocking of the .deb files by changing permissions. I think this is not a good procedure for dealing with buggy source. There will always be bugs. There needs to be at least one binary available for thos…

Comment by Verheek June 2011 permalink
No Sound from 1.8.2RC2
I got rabbitmq working on a clean Ubuntu 10.04 with the latest updates and no /etc file needed. I also didn't have blank password problems. I'm convinced a lot of problems come from a messy OS. Jeremy

Comment by Verheek June 2011 permalink
rabbitmq-server fails to install
sudo sed -i 's/nullok_secure/nullok/' /etc/pam.d/common-auth sudo passwd -d postgres blanked the password for postgres Now the install works.

Comment by Verheek June 2011 permalink
rabbitmq-server fails to install
I have a similar problem now trying to install the latest airtime-dev (git pull origin master). I get a password each time it tries to create the airtime user. I have changed the postgres user password to postgres so I can at least get past the pa…

Comment by Verheek June 2011 permalink
No "Air Time" since upgrade 1.8.0
Cancel your show and create a new one. Does this help? I installed it from source on a fresh Ubuntu Lucid with the current updates and it works although I did have to reinstall it once due to some misconfiguration I caused in /etc/airtime . I…

Comment by Verheek April 2011 permalink
Help setting a VPS with airtime
Quote:Is just connecting the streaming audio from ICECAST to a computer that is connected to internet and converting the streaming signal to the audio entrance of my radio system like any other listener online?. Ideally you would use a radi…

Comment by Verheek April 2011 permalink
Recording a Show
Got it. Somehow I thought it recorded what was on air during that time period for later playback regardless of the source. Jeremy

Comment by Verheek April 2011 permalink
rabbitmq-server fails to install
Well it was a clean install last fall ... But a lot of experimenting and playing around has occurred while developing a web radio host. Does Lucid allow for null passwords by default in PAM? This option may have been removed by a harden…

Comment by Verheek April 2011 permalink
Airtime 1.7.0 install issue: phing-2.4.2
I also had this problem Quote:$sudo pear install phing/phing-2.4.2 No releases available for package "pear.phing.info/phing" install failed and did the following: sudo pear uninstall phing/phing-2.4.2 sudo pear channel…

Comment by Verheek April 2011 permalink
Help setting up a music server on vps
That's the weird stuff that happens. Use the import script ~/airtime/utils/airtime-import . You can either link to them or copy them. Probably best to copy or else you have to keep the source files' location static. Jeremy

Comment by Verheek April 2011 permalink
Help setting up a music server on vps
I'm running a guest Ubuntu Lucid on a VMWare 4 server without a soundcard. It works fine in 1.6.1 and 1.7.0 . You can also play the songs in the library via the web browser from the playlist creation screen. Make sure your airtime and apa…

Comment by Verheek April 2011 permalink
Airtime 1.7.0 Released
Good work! I hope you guys have a party, celebrate and then take time off! Don't burn out because we are eagerly anticipating 2.0! Jeremy

Comment by Verheek April 2011 permalink
Apache2 Errors
OK the good news is it's all fixed and 1.7 is running fine so far. I had to gut apache2 because I had messed up the config with webmin. On top of that I discovered apt-get wasn't actually deleting /etc/apache2 when purging the instal…

Comment by Verheek April 2011 permalink
debug.log
Is it worth using logrotate or will this be built into airtime? Jeremy

Comment by Verheek April 2011 permalink
rabbitmq-server fails to install
Ok after _alot_ of digging I got this to install without changing the rabbitmq user password. One was this post https:// bugs.launchpad.net/ubuntu/+source/shadow/+bug/735341?comment s=all to reset the root account expiry. This allowed the --…

Comment by Verheek April 2011 permalink
1.7-Alpha sneek peek
Good call on the rabbitmq.conf file. Thought I had done that but it must have gotten deleted in one of the install/purge cycles. Now I have @400000004d962c06226a1cac 2011-04-01 15:48:12,577 INFO - [pypopush.py : run() : line 222] - heartbeat …

Comment by Verheek April 2011 permalink
1.7-Alpha sneek peek
I also added this rabbitmq.conf file but still had the password issue when installing rabbitmq-server on Ubuntu Lucid. It seems to be critical for the /etc/hosts file to be setup correctly or this rabbitmq.conf file to be added for rabbitmq to work…

Comment by Verheek April 2011 permalink
Sound and library problems
Ok I have uninstalled, installed the latest git and rebooted. The playlist started but no On Air light. One thing that is different is now Icecast shows a blank for Current Song instead off offline. Likewise VLC shows a blank and just the publish…

Comment by Verheek April 2011 permalink
Sound and library problems
Hi Ofir, Ok I have uninstalled, installed the latest git and rebooted. But I can't create a playlist at the moment. I guess this part is being worked on. The playlist meta-data entry doesn't appear. It just goes blank when I click …

Comment by Verheek March 2011 permalink
Sound and library problems
Hi Martin, Sure I can attach the logs in the future. I don't remember any issues in 1.6.x really. I have run that on a looping 60min playlist for a couple days and it's fine. Mind you I didn't check the log either. …

Comment by Verheek March 2011 permalink
Sound and library problems
Hmm yes I installed from the latest master from yesterday and everything worked fine except that icecast shows offline. pypo log: Quote:@400000004d925649051edffc 2011-03-29 17:59:27,085 INFO - [pypofetch.py : prepare_playlists() : line 1…

Comment by Verheek March 2011 permalink
rabbitmq-server fails to install
Ok I changed the password on the rabbitmq user, ran apt-get install -f to repair the rabbitmq install, typed in that password and it started. Then I ran apt-get purge rabbitmq, typed in the password and tried again and then it uninstalled. When I …

Comment by Verheek March 2011 permalink
Sound and library problems
Hi Martin, A re-push automatic (on startup) or manual option would be very useful because you don't want to have to wait, especially if the playlist is 60 minutes, for the next sync and in the meantime there is silence because something di…

Comment by Verheek March 2011 permalink
It Works! But no content
Seems to me it was necessary to restart apache2 after running the uninstall and then running it again to drop the database and user. But I haven't had to do the restart in subsequent versions. Jeremy

Comment by Verheek March 2011 permalink
rabbitmq-server fails to install
Hi Martin, I took a weekend break from it. I spent a lot of Friday trying similar solutions to the one you linked to. But from what I could figure, the error is not related to the hosts file but to changing to the rabbitmq user with su. …

Comment by Verheek March 2011 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Follow Verheek

About

Username: Verheek
Joined: January 2011
Visits: 0
Last Active: December 2015
Roles: Member
Posts: 158

Friends

My Badges

Total Points: 80

Verheek

Howdy, Stranger!

About

Friends

My Badges

Top Posters